Delock Converter USB 2.0 > Serial RS-422/485 with 3 kV Isolation

Item No. 62501
62501
62501
62501
62501 1
62501 2
62501 3

Description

This USB 2.0 to serial RS-422/485 converter by Delock offers an RS-422/485 connection for measuring devices, POS systems, printers, modems, IoT devices etc. The galvanic isolation prevents data transmission errors with uneven earthing potentials, ground loops or voltage spikes. The converter is suitable for DIN rail mounting.

Galvanic isolation
The galvanic isolation (3 KV) is done with optical isolators.


Specification

  • Connector:
    Host: 1 x Mini USB 2.0 B female
    Device: 1 x RS-422/485 Terminal Block 5 pin
  • Data transfer rate up to 1 Mb/s
  • 1 x DIP switch: RS-422/485 set operating mode
  • LED indicators for status TX / RX
  • 3 kV optical isolation
  • ± 15 kV ESD protection for all signal pins
  • Supports: RS-485 Echo Mode
  • Terminalresistors ON/OFF
  • Power consumption: 54 mA / 270 mW
  • Power supply via USB (Bus-Powered)
  • Operating temperature: - 30° ~ 75° C
  • Storage temperature: - 40° ~ 85° C
  • Relative humidity: 5 ~ 95 % (not condensing)
  • Housing: plastic
  • Dimension (LxWxH): ca. 101 x 42 x 22 mm


System requirements

  • Windows XP/XP-64/Vista/Vista-64/7/7-64/8/8-64/8.1/8.1-6410/10-64/11, Server 2012/2012R2/2016, Mac OS 10.5, Linux Kernel 2.6
  • PC or notebook with one free USB port


Package content

  • Converter
  • USB 2.0 cable, length: ca. 1 m
  • Mounting set for DIN rail
  • Driver CD
  • User manual


Package

  • Box


Here you can find information about Galvanic isolation

Here you can find information about RS-422 / RS-485

General
Function
• Plug & Play
Mounting type
• DIN rail mounting: 35 mm
Specification
• RS-422 / RS-485 (EIA / TIA)
• USB 2.0
Supported operating system
• Linux Kernel 2.6 or above
• Mac OS 10.14.1 or above
• Windows 10 32-Bit
• Windows 10 64-Bit
• Windows 7 32-Bit
• Windows 7 64-Bit
• Windows 8.1 32-Bit
• Windows 8.1 64-Bit
• Windows Server 2012 R2
• Windows Server 2012
• Windows Server 2016
• Windows 11
LED indicator
• RX / TX
Protection
• ESD (Electrostatic Discharge)
• Galvanische Trennung
Interface
Connector 1
• 1 x USB 2.0 Type Mini-B female
Connector 2
• 1 x 5 pin terminal block
Technical characteristics
Chipset
• FTDI 232R
Data transfer rate
• up to 921.6 Kbps
Operating temperature
• -40 °C ~ 85 °C
Humidity
• 5 ~ 95 %
Signal transmission
• Tx+, Tx-, Rx+, Rx-, GND
Data transmission
• asynchronous
• Bi-directional
• Half duplex
• full duplex
• differential
Voltage
• USB Bus powered (no additional power supply required)
Current consumption
• < 100 mA
UART
• USB to serial UART
Resistor
• Terminalresistor 120 Ω ON/OFF
Support
• Modbus
• RS-485 Echo Mode
Physical characteristics
Housing colour
• black
Housing material
• Plastic
Pin finishing
• gold-plated
Length
• 101 mm
Width
• 42 mm
Height
• 22 mm
Overvoltage protection
• ±15 kV ESD Human Body Model (HBM)
• ±15 kV EN / IEC61000-4-2 Air Gap Discharge
Insulator
• 3 kV
LED colour
• green
• yellow
Chipset manufacturer More information can be obtained from the chipset manufacturer at the following website:
More informations about this product

Microsoft WHQL certified
 
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.