Delock 2.5″ Converter USB 3.1 Gen 2 USB Type-C™ female > 2 x mSATA with RAID 7 mm

Item No. 62852
62852
62852
62852
62852 1
62852 2
62852 3
This product is not available anymore.

Description

This converter by Delock enables the connection of up to two mSATA SSD and can be built in as 2.5″ disk. Therefor the converter will be installed into the system through the USB interface. When using more than one SSD, there is the possibility to use different RAID level.


Specification

  • Connectors:
    1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™ female >
    2 x mSATA slot (half size / full size)
  • Chipset: Asmedia ASM1352R
  • Form factor: 2.5″
  • Data transfer rate up to:
    SuperSpeed USB 10 Gbps,
    SuperSpeed USB 5 Gbps,
    Hi-Speed 480 Mbps,
    Full-Speed 12 Mbps,
    Low-Speed 1.5 Mbps,
    SATA 6 Gbps
  • Downwards compatible to USB 3.0, USB 2.0, USB 1.1
  • 1 x Reset button
  • DIP switch for RAID mode setting
  • For 3.3 V mSATA module
  • 4 x LED indicator
  • Supports RAID 0, 1, JBOD
  • Dimensions (LxWxH): ca. 100 x 70 x 7 mm


System requirements

  • Windows 7/7-64/8.1/8.1-64/10/10-64, Linux Kernel 3.19
  • A free USB interface


Package content

  • Converter
  • Cable USB Typ-A male to USB-C™ male, length ca. 50 cm
  • User manual


Package

  • Retail Box


Here you can find information about USB Type-C™ + USB 5/10/20 Gbps

General
Form factor
• 2.5"
Supported operating system
• Linux Kernel 3.19 or above
• Windows 10 32-Bit
• Windows 10 64-Bit
• Windows 7 32-Bit
• Windows 7 64-Bit
• Windows 8.1 32-Bit
• Windows 8.1 64-Bit
LED indicator
• 4 x
Interface
Connector 1
• 1 x USB 10 Gbps USB Type-C™ female
Connector 2
• 2 x mSATA slot (half size / full size)
Technical characteristics
Chipset
• Asmedia ASM1352R
Data transfer rate
• USB 10 Gbps up to 10 Gb/s
Physical characteristics
Length
• 100 mm
Width
• 70 mm
Height
• 7 mm
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.