Delock industry WLAN USB module 144 Mbps

Item No. 95820
95820  Delock industry WLAN USB module 144 Mbps
95820  Delock industry WLAN USB module 144 Mbps small 1
This product is not available anymore.

Description
The Delock USB module offers in a compact construction WLAN function via USB interface and is ideal for installation in industry components like sensors, IPCs, PDAs or notebooks.
 
Specification
• USB 2.0 interface
• WLAN according IEEE b/g/n (Draft 2.0)
• Chipset: Ralink RT2770 (2720)
• 2,4GHz
• 11b: 1,2,5.5,11Mbps / 11g: 6,9,12,24,36,48,54Mbps
• 11n: legacy, mixed and green field modes, supports 20/40 MHz band width MCS0- 7 (150Mbps PHY rate
  support)
• 2 mini coax antenna connection (1T2R )
• Hardware WEP, TKIP, AES engines
• EAP  TLS, TTLS, LEAP, PEAP
• WPA1/2  PSK (WPA home)
• WPA1/2  802.1x (WPA enterprise)
• Oposite data fllow, link adaptation, roaming
• Voltage: 5V
• Operating temperature: 0~65°C
• Relative humidity during operation: max.95% (non-condensing)
• Size: 60 x 25 x 3,8mm (LxWxH)
• For Windows CE 5.0 & 6.0/ 98SE/ ME/2000/XP/Vista, Windows 7, Linux2.6x, Mac OS 10.3 & 10.4
 
Optional ref. 95835 connecting cable
 
System requirement
• USB Port
• Windows CE 5.0 & 6.0/ 98SE/ ME/2000/XP/Vista, Windows 7, Linux2.6x, Mac OS 10.3 & 10.4
 
Package content
• USB WLAN module
• Driver CD

Package
• Delock

What is FAA The Pin 1 FAA is for the RF function Turn-On/Off switching by "Hotkey" (this is mainly designed for notebook PC systems only). Usually it is unnecessary to use the Pin 2 LINK (for LED) and the Pin 1 FAA for the non-Notebook PC system devices. The RF function is activated (pulled High ) even without connecting the Pin 1 to the system motherboard.
Please note: If you connect the Pin 1 FAA to GND, it will make it "pull Low" and hence will disable the RF function! Please note. And the Pin 6 is for the VCC input from the motherboard.
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.