Delock External Dual Enclosure for 2 x 2.5″ SATA HDD / SSD with USB Type-C™ female transparent - tool free

Item No. 42622
42622
42622
42622
42622
42622
42622
42622
42622
42622 1
42622 2
42622 3
42622 4
42622 5
42622 6
42622 7
42622 8

Description

This plastic enclosure by Delock is used for the installation of two 2.5″ SATA hard drives or SSDs. Despite the slim design, hard disks up to a height of 9.5 mm can be installed. The included USB Type-C™ to USB Type-A cable allows the connection to a free USB Type-A female port.

Transparent enclosure with stand
The sturdy, transparent plastic housing provides a view inside to quickly see which memory is inside. A stand is supplied for vertical operation.

HDD / SSD installation without tools
The special feature of this enclosure is that no tools are required to install the HDD. The lid can be pushed backwards by a little pressure, the HDD will be attached to the SATA port and then the lid is reattached until it locks.


Specification

  • Connectors:
    external:
    1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ female
    1 x DC jack
    internal:
    2 x SATA 6 Gb/s 22 pin receptacle
  • Suitable for 2.5″ SATA HDD / SSD:
    HDD height up to 9.5 mm
    SATA HDD / SSD up to 6 Gb/s
    supports 5 V HDD / SSD
    HDD / SSD up to 4 TB
  • Chipset: JMicron JMS561U
  • Data transfer rate:
    SuperSpeed USB 5 Gbps,
    Hi-Speed 480 Mbps,
    Full-Speed 12 Mbps,
    Low-Speed 1.5 Mbps
  • LED indicator for power and access
  • Transparent plastic housing
  • Dimensions (LxWxH): ca. 154 x 82 x 26 mm
  • Hot Swap, Plug & Play


Power supply specification

  • Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.4 A
  • Output: 5 V / 2 A
  • Ground outside, plus inside
  • Dimensions:
    inside: ø ca. 2.5 mm
    outside: ø ca. 5.5 mm
    length: ca. 10 mm


System requirements

  • Chrome OS 74.0 or above
  • Linux Kernel 3.4 or above
  • Mac OS 10.14.5 or above
  • Windows 7/7-64/8.1/8.1-64/10/10-64
  • PC or laptop with a free USB Type-A port


Package content

  • 2.5″ external enclosure
  • Cable USB-C™ male to USB Type-A male, length ca. 1 m
  • Stand
  • Power supply
  • User manual


Package

  • Retail Box

General
Function
• Hot Swap
• Plug & Play
Suitable for data medium
• 2.5″
• SSD or HDD
• height up to 9.5 mm
Supported operating system
• Chrome OS 74.0 or above
• Linux Kernel 3.4 or above
• Mac OS 10.14.5 or above
• Windows 10 32-Bit
• Windows 10 64-Bit
• Windows 7 32-Bit
• Windows 7 64-Bit
• Windows 8.1 32-Bit
• Windows 8.1 64-Bit
Interface
External
• 1 x DC jack 5.5 mm x 2.5 mm
Internal
• 2 x SATA 22 Pin Buchse
Technical characteristics
Chipset
• JMicron JMS561
Physical characteristics
Housing material
• Plastic
Cable length
• 1 m
Length
• 154 mm
Width
• 82 mm
Height
• 26 mm
Colour
• transparent
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.