Delock Module M.2 NGFF 2242 B+M > 2 x SATA 6 Gb/s 7 pin female with RAID
Description
This M.2 NGFF module by Delock expands a system by two internal SATA 6 Gb/s interfaces. The module supports RAID 0, 1 and Port Multiplier.
Note
The SMART function is not supported. JBOD is only supported on SATA controllers with port multiplier function.
Specification
- Connector:
59 pin M.2 NGFF key B+M male >
2 x SATA 6 Gb/s 7 pin female - Interface: SATA
- Form factor: M.2 NGFF 2242
- Chipset: JMicron JMS562
- Support RAID 0, 1, Port Multiplier
- RAID mode can be set by jumper
- Data transfer rate up to 6 Gb/s
- Maximum power consumption: 1.65 W (3.3 V x 498 mA)
- Vibration: 5 G @ 7 ~ 2000 Hz
- Shock: 50 G @ 0.5 ms
- Storage temperature: -55 °C ~ +95 °C
- Operation temperature: 0 °C ~ +70 °C
- Weight: 5,5 g
- Dimensions (LxWxH): ca. 42 x 22 x 11 mm
- OS independent, no driver installation necessary
System requirements
- A free M.2 NGFF key B, key M or key B+M slot with 42 mm up to 110 mm based on SATA
Package content
- M.2 module
Package
- Antistatic cover
General
Form factor
• M.2 2242
Supported operating system
• OS independent, no driver installation necessary
Storage temperature range
• -55 °C ~ 95 °C
Interface
connector
• M.2 NGFF based on SATA
Connector 1
• 2 x SATA 6 Gb/s 7 pin receptacle
Technical characteristics
Chipset
• JMicron JMS562
Data transfer rate
• 6 Gb/s
Operating temperature
• 0 °C ~ 70 °C
RAID function
• 0
• 1
• Port Multiplier
• 1
• Port Multiplier
Shock
• 50 G @ 0.5 ms
Current consumption
• 498 mA
Vibration
• 5 G @ 7 ~ 2000 Hz
Physical characteristics
Weight
• 5.5 g
Length
• 42 mm
Width
• 22 mm
Height
• 11 mm