Delock USB Type-C™ 10 Gbps Docking Station for 2 x SATA HDD / SSD with Clone Function

Overview

Description

This docking station by Delock enables an external connection of up to two 2.5″ or 3.5″ SATA HDDs or SSDs through the USB-C™ interface. This solution does not require an external enclosure since the drive can be plugged into the docking station directly. Furthermore the clone function enables to copy the content of one HDD to another without using a PC.

Technical details

• Connectors:
    1 x USB 10 Gbps USB Type-C™ female
    2 x SATA 6 Gb/s 22 pin receptacle
    1 x DC jack
  
• Chipset: Asmedia ASM1352R
  
• Function key:
    1 x Clone button
    1 x On / Off switch
  
• For 2.5″ and 3.5″ SATA HDD / SSD
  
• Suitable for all SATA HDDs up to SATA 6 Gb/s
  
• Data transfer rate up to 6 Gb/s
  
• LED indicator for power, access and copy status
  
• Dimensions (LxWxH): ca. 153 x 110 x 62 mm
  
• Plug & Play

Power supply specification

• Power supply type: Euro wall power plug
  
• Model identifier: CS-1203000
  
• Input voltage: 100 - 240 V
  
• Input AC frequency: 50 / 60 Hz
  
• Input current: 1.5 A
  
• Output voltage / Output current / Output power: 12.0 V / 3.0 A / 36.0 W
  
• Average active efficiency: 89.6 %
  
• Efficiency at low load (10 %): 86.8 %
  
• No-load power consumption: 0.10 W
  
• Power supply cable length: ca. 1.2 m
  
• DC power connector: 5.5 x 2.1 mm
  
• Ground outside, plus inside

System requirements

• Linux Kernel 4.9.4 or above
  
• Mac OS 10.13.3 or above
  
• Windows 7/7-64/8.1/8.1-64/10/10-64/11
  
• PC or laptop with a free USB Type-C™ port

Package content

• Docking station
  
• Cable USB-C™ male to USB-C™ male, length ca. 80 cm
  
• External power supply 12 V / 3 A
  
• User manual

Package

• Retail Box