Delock USB 3.0 Dual Docking Station for 2 x SATA HDD / SSD with Clone Function in Metal Housing
Description
This HDD / SSD Docking Station in metal frame by Delock enables an external connection of two 2.5″ or 3.5″ SATA HDDs / SSDs through the USB interface. This solution does not requires an external enclosure since the HDD / SSD will be plugged into the docking station directly. Furthermore the clone function enables to copy the content of one HDD to another without using a PC.
Specification
• Connectors:
2 x SATA 6 Gb/s 22 pin receptacle
1 x USB 3.0 Type-B female
1 x DC jack
• Chipset: Prolific PL2773
• Function key:
1 x Clone button
1 x On / Off switch
• For 2.5″ and 3.5″ SATA HDD / SSD
• Suitable for all SATA HDDs / SSDs up to SATA 6 Gb/s
• Data transfer rate up to:
SuperSpeed 5 Gb/s,
Hi-Speed 480 Mb/s,
Full-Speed 12 Mb/s,
Low-Speed 1.5 Mb/s
• 2 x eject button
• LED indicator for power, access and copy status
• Dimensions (LxWxH): ca. 151 x 109 x 59 mm
• Plug & Play
Power supply specification
• Wall power supply
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1 A
• Output: 12 V / 3 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 12.0 mm
System requirements
• Chrome OS
• Linux Kernel 4.9.4 or above
• Mac OS 10.13.6 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port
Package content
• Dual Docking Station
• 1 x cable USB 3.0 A male to USB 3.0 B male, length ca. 1 m
• External power supply
• User manual
Package
• Retail Box
• Clone Function
• 3.5″
• SSD or HDD
• Linux Kernel 4.9.4 or above
• Mac OS 10.13.6 or above
• Windows 10 32-bit
• Windows 10 64-bit
• Windows 7 32-bit
• Windows 7 64-bit
• Windows 8.1 32-bit
• Windows 8.1 64-bit
• 1 x DC 12 V power connector


















