ProductsAdapter / ConverterWhole category64070

Delock USB 2.0 to 12 Port Serial RS-232 Hub with surge protection and extended temperature range

Item No. 64070

Overview Technical details Documents Driver

Description

This compact RS-232 hub with High Speed USB 2.0 to 12 x RS-232 serial by Delock supports connections for printers, controllers, measuring devices etc. Up to four of these hubs can be cascaded (series connection), thus up to 48 RS-232 ports are provided on one USB 2.0 port. The LEDs on each single port indicate the current RS-232 status. A Windows application supports centralized control of the serial COM ports. The hub is suitable as a desktop device and for wall or DIN rail mounting.

Specification

Connectors:
1 x USB 2.0 Type-A female (cascading)
1 x USB 2.0 Type-B female
12 x serial RS-232 DB9 male with nuts
1 x 5 V DC jack 5.5 x 2.1 mm
Chipset: FTDI FT231XS
RS-232 serial:
Data transfer rate up to 12 x 460.8 Kbps
Databits: 7, 8
Stop bits: 1, 2
Parity: even, odd, none, mark, space
Buffer: FIFO 1 KB
Signals: DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI
Plug & Play
ESD Protection (electrostatic discharge):
±15 kV ESD IEC 61000-4-2 air discharge
±8 kV ESD IEC 61000-4-2 contact discharge
Surge Protection: 250 W peak pulse (TVS)
Status LEDs: TX, RX, ACT
Operating voltage: 5 V DC
Housing: metal
Colour: black
Operating temperature: -40 °C ~ 85 °C
Relative humidity: 0 - 80 % (non condensing)
Weight: ca. 1033 g
Dimensions (LxWxH): ca. 268 x 102 x 40 mm

Power supply specification

Wall power supply
Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.2 A
Output: 5 V / 1 A
Ground outside, plus inside
Cable length: ca. 1.2 m
Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 9.3 mm

System requirements

Linux Kernel 4.1 or above
Windows 7/7-64/8.1/8.1-64/10/10-64/11
PC or laptop with a free USB Type-A port

Package content

RS-232 hub
Cable USB Type-A male to Type-B male, length ca. 1.8 m
Wall mounting brackets
Mounting for 35 mm DIN rail
12 x mounting screws
Power supply
User manual

Package

Here you can find information about RS-232

General

Function

• Plug & Play

Mounting type

• DIN rail 35 mm
• Wall mounting

Specification

• RS-232 (EIA / TIA)
• USB 2.0
• UHCI/OHCI/EHCI

Supported operating system

• Linux Kernel 4.10 or above
• Windows 10 32-Bit
• Windows 10 64-Bit
• Windows 7 32-Bit
• Windows 7 64-Bit
• Windows 8.1 32-Bit
• Windows 8.1 64-Bit

LED indicator

• power and activity
• RX / TX

Protection

• ESD (Electrostatic Discharge)
• Überspannungsschutz 250 W

Interface

Connector 1

• 1 x USB 2.0 Type-B

Connector 2

• 12 x Seriell RS-232 DB9 Stecker

connector 3

• 1 x DC jack

connector 4

• 1 x USB 2.0 Type-A female

Technical characteristics

Operating voltage

• 5 V

Data transfer rate

• 12 x bis zu 460,8 Kbps

Operating temperature

• -40 °C ~ 85 °C

Humidity

• 0 ~ 80 %

Signal transmission

• RI, RXD, TXD, CTS, RTS, DCD, DTR and GND

Data transmission

• asynchronous
• Bi-directional
• full duplex

UART

• USB to serial UART

Physical characteristics

Housing colour

• black

Housing material

• metal

Weight

• 1033 g

Cable colour

• black

Cable length incl. connector

• 1.8 m

Length

• 268 mm

Width

• 102 mm

Height

• 40.0 mm

Switch

• On / Off

Overvoltage protection

• ±15 kV EN / IEC61000-4-2 Air Gap Discharge
• ±8 kV EN / IEC 61000-4-2 Contact Discharge
• ±15 kV ESD Human Body Model (HBM)

LED colour

• red
• green
• yellow

Power supply

Type

• Euro wall power supply

Input

• AC 100 - 240 V / 50 - 60 Hz / 0.2 A

Output

• 5 V / 1 A

Connector

• DC male 5.5 mm x 2.1 mm

Cable length

• 1.5 m

CE - Declaration of conformity

Driver / Treiber Version 2.4.2

24.10.2018

Windows 7, 8.1, 10, 2012, 2012R2, 2016

1.61 MB

Driver / Treiber Version 2.12.28

06.06.2018

Windows 7 / 8 / 8.1 / 10 / 11 / 2012 / 2012R2 / 2016

2.11 MB

Windows Treiber / Driver Version 2.12.36.4

27.09.2021