Delock Converter 1 x Serial RS-232 DB9 to 1 x Serial RS-485 with ESD protection 15 kV surge protection 600 W

Item No. 64140
64140 Delock Converter 1 x Serial RS-232 DB9 to 1 x Serial RS-485 with ESD protection 15 kV surge protection 600 W
64140
64140
64140
64140 Delock Converter 1 x Serial RS-232 DB9 to 1 x Serial RS-485 with ESD protection 15 kV surge protection 600 W small 1
64140 small 2
64140 small 3
64140 small 4
Adapter tool

Description

This RS-232 to RS-485 converter by Delock is suitable for all serial devices, e.g. on machine controls, fieldbus systems, measuring instruments, computers, printers etc. The level converter can be used as a coupling directly between two DB9 connections without an additional power supply.


Specification

  • Connectors:
    1 x serial RS-232 DB9 female with screws
    1 x serial RS-485 DB9 male with nuts
    1 x RS-485 Terminal Block 4 pin
  • Auto data flow control
  • Plug & Play
  • Supports Modbus
  • Data transfer: asynchronous, half duplex
  • Data transfer rate: 300 bps - 115.2 Kbps
  • ±15 kV ESD protection for all serial RS-485 signals
  • Surge protection: 600 W (TVS)
  • Housing material: plastic
  • Colour: beige
  • Operating temperature: -25 °C ~ 70 °C
  • Relative humidity: 5 - 95 % (non condensing)
  • Dimensions (LxWxH):
    Converter: ca. 63 x 33 x 17 mm
    Terminal block: ca. 32 x 31 x 16 mm
  • Bus Power from RS-232: TXD, RTS or DTR
  • No external power supply needed


System requirements

  • Device with a free RS-232 port


Package content

  • Converter RS-232 to RS-485
  • Terminal block adapter


Package

  • Box


RS-232 Here you can find information about RS-232

RS-422 / RS-485 Here you can find information about RS-422 / RS-485

General
Function
• Plug & Play
• Auto RTS Control
Specification
• RS-232 (EIA / TIA)
• RS-422 / RS-485 (EIA / TIA)
Supported operating system
• OS independent, no driver installation necessary
Protection
• ESD (Electrostatic Discharge)
• Surge Protection 600 W
Interface
Connector 1
• 1 x serial RS-232 DB9 female
Connector 2
• 1 x Serial RS-485 DB9 male
Technical characteristics
Data transfer rate
• 300 bps - 115.2 Kbps
Operating temperature
• -25 °C ~ 70 °C
Humidity
• 5 ~ 95 %
Data transmission
• asynchronous
• Half duplex
Voltage
• RS-232 Bus Power TXD, RTS or DTR
Physical characteristics
Housing material
• Plastic
Pin finishing
• gold-plated
Screw type
• #4-40 UNC
Length
• 63 mm
Width
• 33 mm
Height
• 17 mm
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.