Skip directly to content

Delock USB 20 Gbps M.2 Docking Station for 2 x M.2 NVMe PCIe SSD with Clone and Erase Function

Item No. 64300

Overview

Description

This M.2 docking station by Delock enables the installation of two M.2 PCIe NVMe SSDs and it can be connected via USB to the PC or laptop. The included USB cable allows the connection to a free USB-C™ port.
Clone and erase function
The clone function enables to copy the content of one SSD to another without using a PC. No connection to the computer is required for the erase function. Selectively one drive or two drives can be deleted at the same time. Further different erase modes are available.
Ideal test equipment
The memory is simply plugged into the robust housing and can be used immediately. No screws, tools or accessories are required, which means that the SSD can be changed quickly.
Technical details
  • Connectors:
      1 x USB 20 Gbps USB Type-C™ female
      2 x M.2 key M slot
      1 x DC jack
  • Chipset: JMicron JMS586U
  • Supports M.2 modules with key M or key B+M based on PCIe (NVMe)
  • Supports NVM Express (NVMe)
  • Data transfer rate up to 20 Gbps
  • Supports UASP
  • Supports TRIM
  • LED indicator for power, access and copy / erase status
  • Function key:
      1 x switch for mode
      1 x Clone button
      1 x On / Off switch
  • Bootable
  • Dimensions (LxWxH): ca. 80 x 80 x 33 mm
  • Hot Plug, Plug & Play
Power supply specification
  • Power supply type: Euro wall power plug
  • Model identifier: FJ-SW126G1202000E
  • Input voltage: 100 - 240 V
  • Input AC frequency: 50 / 60 Hz
  • Input current: 0.6 A
  • Output voltage / Output current / Output power: 12.0 V / 2.0 A / 24.0 W
  • Average active efficiency: 87.9 %
  • Efficiency at low load (10 %): 81.2 %
  • No-load power consumption: 0.08 W
  • Power supply cable length: ca. 1.5 m
  • Ground outside, plus inside
  • Dimensions:
      inside: ø ca. 2.1 mm
      outside: ø ca. 5.5 mm
      length: ca. 10.0 mm
System requirements
  • Android 13.0 or above
  • Chrome OS
  • Linux Kernel 6.2 or above
  • Mac OS 13.1 or above
  • Windows 10/10-64/11
  • iPad Air (4th Generation) or above
  • iPad Pro (3rd Generation) or above
  • Surface Pro 7
  • Device with a free USB Type-C™ port or with a free Thunderbolt™ 3 or Thunderbolt™
      4 port
Package content
  • M.2 docking station
  • Cable USB-C™ male to USB-C™ male, length ca. 1 m
  • External power supply
  • User manual
Package
  • Retail Box

Features

General

Function
  • bootable
  • Clone Function
  • Erase function
  • TRIM
Supported operating system
  • Chrome OS
  • Surface Pro 7
  • Windows 10 32-Bit
  • Windows 10 64-Bit
  • iPad Pro (3rd Generation) or above
  • iPad Air (4th Generation) or above
  • Windows 11
  • Mac OS 13.1 or above
  • Linux Kernel 6.2 or above
  • Android 13.0 or above
LED indicator
  • power, access and copy status
Supported module
  • M.2 modules with key M or key B+M based on PCIe (NVMe)

Interface

Connector 1
  • 2 x M.2 key M slot
Connector 2
  • 1 x DC jack
Connector 3
  • 1 x USB 20 Gbps USB Type-C™ female

Technical characteristics

Chipset
  • JMicron JMS586U
Data transfer rate
  • 20 Gbps

Physical characteristics

Housing material
  • Plastic
Length
  • 80 mm
Width
  • 80 mm
Height
  • 33 mm
Colour
  • black

Power supply

Power supply type
  • Euro wall power supply
Model identifier
  • FJ-SW126G1202000E
Input voltage
  • 100 - 240 V
Input AC frequency
  • 50 / 60 Hz
Input current
  • 0.6 A
Output voltage / Output current / Output power
  • 12.0 V / 2.0 A / 24.0 W
Average active efficiency
  • 87.9 %
Efficiency at low load (10 %)
  • 81.2 %
No-load power consumption
  • 0.08 W
Power supply connector
  • DC male 5.5 mm x 2.1 mm
  • Ground outside, plus inside
Cable length of power supply
  • 1.5 m
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.