Delock Adapter cable USB Type-A to Serial RS-232 RJ12 with ESD potection Skywatcher 2 m

Numer artykułu 66735
66735 Delock Adapter cable USB Type-A to Serial RS-232 RJ12 with ESD potection Skywatcher 2 m
66735
66735
66735
66735 Delock Adapter cable USB Type-A to Serial RS-232 RJ12 with ESD potection Skywatcher 2 m small 1
66735 small 2
66735 small 3
66735 small 4
Narzędzie Adaptery Narzędzia Przewody

Opis

This USB to RS-232 RJ12 adapter cable by Delock is suitable for the PC operation of hand control boxes by the Skywatcher Telescopes. With the appropriate astronomy applications, the position of the telescope can be controlled by the computer or a firmware update can be carried out.


Specyfikacja

  • Connectors:
    1 x USB 2.0 Type-A male
    1 x Serial RS-232 RJ12 plug
  • Chipset: FTDI FT231X
  • Plug & Play
  • FIFO: 512 Byte - TX
  • FIFO: 512 Byte - RX
  • Compatible with USB 3.0, USB 2.0, and USB 1.1 full speed 12 Mbps
  • Data transfer rate up to 230.4 Kb/s
  • Signals: RXD(2), GND(3), GND(4), TXD(5)
  • ESD protection IEC 61000-4-2
    HCP & VCP: ±4 kV
    Air Discharge: ±8 kV
    Contact Discharge: ±4 kV
  • Colour: black
  • Cable length incl. connectors: ca. 2.0 m
  • Suitable for various Skywatcher hand controllers


Wymagania systemowe

  • Windows 8.1/8.1-64/10/10-64/11
  • PC or laptop with a free USB Type-A port


Zawartość opakowania

  • Adapter cable USB 2.0 Type-A to RS-232 RJ12


Opakowanie

  • Torba na zamek błyskawiczny

General
Specyfikacja
• RS-232 (EIA / TIA)
• USB 2.0
Supported operating system
• Windows 10 32-bit
• Windows 10 64-bit
• Windows 8.1 32-Bit
• Windows 8.1 64-Bit
Interface
Złącze 1
• 1 x USB 2.0 Typ-A męski
Złącze 2
• 1 x RJ12 męski
Technical characteristics
Chipset
• FTDI FT231XS
Szybkość transmisji danych
• bis zu 230,4 Kbps
FIFO
• 2 x 512 Byte
Signal transmission
• TxD, RxD und GND
UART
• USB to serial UART
Physical characteristics
Cable length incl. connector
• 2 m
Kolor
• czarny
Overvoltage protection
• ±8 kV EN / IEC 61000-4-2 Air Gap Discharge
• ±4 kV EN / IEC 61000-4-2 Contact Discharge
• ±4 kV EN / IEC 61000-4-2 VCP & HCP
Wszelkie pojawiające się tutaj nazwy i znaki należą do ich odpowiednich właścicieli. Błędy drukarskie, zmiany & pomyłki zastrzeżone.