Delock Converter 3G-SDI to HDMI
Description
This Delock converter can be used to convert an HD- or 3G-SDI signal to an HDMI signal. You can connect e. g. a camera with HD-SDI output to an HDMI monitor. The SDI signal is transmitted via a conventional 75 Ohm coaxial cable with BNC connectors.
Specification
- Connector:
Input:
1 x BNC female (SDI)
Output:
1 x BNC female (SDI, pass-through)
1 x HDMI-A female - Chipset: GV7601
- Supports 3G-SDI Level A
- Supported resolution:
SD 480i, 525i and 625i
HD 720p 24, 25, 30, 50 and 60 Hz
HD 1080i 50, 60 Hz
HD 1080p 24, 25, 30, 50 and 60 Hz - Supported data rate: 270 Mb/s ~ 2.97 Gb/s
- Supports 8 channels of 48 kHz PCM audio
- Robust metal housing
- Power consumption: max. 2.5 W
- Dimensions (LxWxH): ca. 100 x 70 x 25 mm
Power supply specification
- Wall power supply
- Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.3 A
- Output: 5 V / 1 A
- Ground outside, plus inside
- Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 9 mm
Package content
- 3G-SDI > HDMI Converter
- Mounting brackets and screws
- Power supply
Package
- Box
Revision notice
08/2021 New power supply
Interface
Connector 1
• 1 x BNC female
connector 3
• 1 x BNC female
Technical characteristics
Chipset
• GV7601
Physical characteristics
Length
• 100 mm
Height
• 25 mm
Optional accessory:
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.

Delock Converter HDMI to 3G-SDI
Item No. 93238

Delock 3G-SDI Splitter 1 in > 4 out
Item No. 93250

Delock 3G-SDI Switch 4 in > 1 out
Item No. 93251

Delock 3G-SDI Splitter 1 in > 8 out
Item No. 93253