Delock Fingerprint module USB2.0
Description
The USB2.0 Fingerprint module by Delock is due to ist Athentec AES1610 sensor, innovative technology and very sturdy sensor surface, most suitable for industrial fields, for Touch Pad navigation as well as for installation into a PC, notebook and tablet PC.
Specification
• USB2.0 interface (12Mbit/s)
• Interface with Suspend and Remote Wakeup function
• USB2.0 interface (12Mbit/s)
• Interface with Suspend and Remote Wakeup function
• Integrated finger-recognition with „remote wakeup“ function
• Sturdy sensor surface:
• Sturdy sensor surface:
- scratch- and shock resistant
- >10Mio. frictions without loss of quality
• High Definition 128x8 True Print Technolgy based on Pixel-500ppi configuration
• Setting of slide speed: 20cm/sec. – 50cm/sec.
• IEC 61000-4-2 Level 4 ESD security (+/- 15KV Air)
• Voltage: 3.3V +/- 0.15V
• Power consumption: • Idle Mode: 0,4mA
• Normal Mode: 4,4mA
• High Definition 128x8 True Print Technolgy based on Pixel-500ppi configuration
• Setting of slide speed: 20cm/sec. – 50cm/sec.
• IEC 61000-4-2 Level 4 ESD security (+/- 15KV Air)
• Voltage: 3.3V +/- 0.15V
• Power consumption: • Idle Mode: 0,4mA
• Normal Mode: 4,4mA
• Touch: 37mA
• Operating temperature: -0°~ 70°C
• 20,8mm x 23,45mm x 4,44mm (W x L x H)
• Operating temperature: -0°~ 70°C
• 20,8mm x 23,45mm x 4,44mm (W x L x H)
System requirement
• a free internal USB2.0 interface
• a free internal USB2.0 interface
Package content
• Fingerprint module
• Fingerprint module
Package
• Delock
• Delock
16.02.2010
Data sheet (English)
43.5 kB
28.11.2008
Data sheet (German)
43.4 kB
25.08.2009
User Manual (English)
1.17 MB