Delock USB 2.0 Camera Module 5.04 mega pixel 62° vertical edge auto focus

Overview

Description

The USB 2.0 camera module by Delock offers a very compact design, high resolution and low power consumption. It is ideally suited for integration into devices. The use of a photosensitive sensor with back side illumination expands the scope of this module.

Technical details

• Connector: USB 2.0 5 pin SMT female SMT, 1 mm pitch
   • Resolution: 5.04 mega pixel
   • With optical IR filter
   • Standard SCCB interface (I²C Bus)
   • Output support for RAW RGB, RGB565/555/444, CCIR656,  
     YUV422/420, YCbCr422 and compression
   • Maximum resolution: QSXGA (2592 x 1944)
   • Automatic image control functions including
     - Automatic exposure control (AEC)
     - Automatic white balance (AWB)
     - Automatic band filter (ABF)
     - Automatic black-level calibration (ABLC)
   • Image quality controls including colour saturation, gamma,
     sharpness (edge enhancement), lens correction, white pixel canceling,
     noise canceling, and automatic 50/60 Hz luminance detection
   • Supports scaling
   • Power consumption:
     Sensor suspend: 90 mA
     Sensor active: 140 mA ± 5 mA @ 640 x 480 pixel
   • Operating voltage: 5 V DC
   • Operating temperature: 5 °C ~ 50 °C
   • Relative humidity during operation: max. 80 %
   • Sensor size: 1/4 inch
   • Sensitivity: 0.6 V (lx s)
   • Signal to noise ratio: 36 dB
   • Dynamic range: 68 dB
   • Auto focus: from 0.1 m
   • Lens: F/2.8
   • Frame rates:
     30 fps @ HVGA, VGA, XGA, 720p, QVGA
     15 fps @ UXGA, 1080p, QXGA
       7 fps @ 2592 x 1944
   • Dimension (LxWxH): ca. 60 x 8 x 6.3 mm

System requirements

• Windows 7/8.1/10
  
• MS DirectX 9.0c and above
  
• Linux 2.6.15 and above with Video4Linux
  
• CPU minimum P4 1.4 GHz, 128 MB RAM

Package content

• Camera module