Delock DisplayPort 1.2 Splitter 1 x DisplayPort in > 2 x DisplayPort out 4K

Item No. 87665
87665 Delock DisplayPort 1.2 Splitter 1 x DisplayPort in > 2 x DisplayPort out 4K
87665
87665 Delock DisplayPort 1.2 Splitter 1 x DisplayPort in > 2 x DisplayPort out 4K small 1
87665 small 2

Description

This splitter by Delock receives a DisplayPort signal from a PC or laptop and splits it to two connected displays. Thereby one DisplayPort connection can be used to operate two DisplayPort monitors. Both outputs are dual-mode capable (DP++), so that HDMI or DVI monitors can be connected with suitable adapters.


Note

The product is a Multi-Stream-Transport (MST) hub and supports the extended desktop configuration of Displayport 1.2. When Mac OS is used, the same image is displayed on both ports (mirrored), it is not possible to use both ports independently of each other.


Specification

  • Connectors:
    Input:
    1 x DisplayPort 20 pin male
    Output:
    2 x DisplayPort 20 pin female
  • Chipset: STDP4320
  • DisplayPort 1.2a specification
  • Active converter, Single / Multi Stream Transport Hub (SST / MST)
  • Functions: Mirrored or Extended (Windows only)
  • Maximum resolution (depending on the system and the connected hardware):
    DisplayPort 1.1 or 1.2 Single Stream Transport (SST):
    up to 1920 x 1080 @ 60 Hz (mirror)
    DisplayPort 1.2 Multi Stream Transport (MST):
    up to 2560 x 1440 @ 60 Hz or 3840 x 2160 @ 30 Hz (mirror or extended)
  • DisplayPort output supports Dual Mode DP++
  • Supports Eyefinity / Single Large Surface (SLS)
  • Audio input formats: 7.1 channel up to 192 kHz sample rate
  • Metal housing
  • Colour: black
  • Cable length without connectors: ca. 30 cm
  • Dimensions (LxWxH): ca. 100 x 67 x 23 mm


System requirements

  • Windows 8.1/8.1-64/10/10-64, Mac ex OS 10.12
  • One free DisplayPort female


Package content

  • DisplayPort Splitter
  • User manual


Package

  • Retail Box


DisplayPort Here you can find information about DisplayPort

Ultra-HD / 4K Here you can find information about Ultra-HD / 4K

General
Specification
• DisplayPort 1.2a
Interface
Output
• 2 x DisplayPort female
Input
• 1 x DisplayPort male
Technical characteristics
Chipset
• STDP4320
Maximum screen resolution
• 3840 x 2160 @ 30 Hz
Physical characteristics
Housing material
• metal
Cable length incl. connector
• 30 cm
Length
• 100 mm
Width
• 67 mm
Height
• 23 mm
Colour
• black
Extended Desktop The splitter is a Multi-Stream-Transport (MST) hub and supports extended desktop configuration. MST mode is only available on DisplayPort 1.2 graphics cards. The splitter will show the same image (mirror) on both outputs if a graphics card with Displayport 1.1 is used.
Maximum Resolution A single Displayport 1.2 connection has a limit amount of bandwidth. This limits the number of displays that can be connected through an MST hub depending on the displays resolution, timing and refresh rate. Please see below for bandwidth usage of different resolutions:
1920 x 1080 @ 60 Hz uses 22%, 1920 x 1200 @ 60 Hz uses 30% bandwidth
2560 x 1440 @ 60 Hz uses 35%, 2560 x 1600 @ 60 Hz uses 38% bandwidth
3840 x 2160 @ 30 Hz uses 43%, 3840 x 2160 @ 60 Hz uses 95% bandwidth
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.