ProductsMobile Racks3.5″47224 Delock 3.5″ Mobile Rack for 1 x 2.5″ SATA HDD / SSD

Delock 3.5″ Mobile Rack for 1 x 2.5″ SATA HDD / SSD

Item No. 47224
prev 1
prev 2
prev 3
prev 4
prev 5
buy now


This Delock Mobile Rack is designed for external or internal connection of a 2.5″ SATA HDD. Insert the HDD directly into the frame and connect it either externally to a Power Over eSATA port with the help of an optional cable, or internally to SATA. The dimension of the frame complies to a standard 3.5″ HDD. Thus you can install the frame into a 3.5″ slot as well as into a 5.25″ mobile rack.


• Connectors:
  outside: 1 x SATA 22 pin plug
  inside: 1 x SATA 22 pin receptacle (NSS connector)
• Suitable for 2.5″ SATA HDD / SSD:
  HDD height up to 12.5 mm
  SATA HDD / SSD up to 6 Gb/s
  supports 5 V HDD / SSD
• Data transfer rate up to 6 Gb/s
• Possible applications:
  1. internally in a 3.5″ bay
  2. inside a 5.25″ mobile rack
  3. externally over eSATAp (cable optional)
• Hot Swap
• With special SATA NSS connector inside to protect the SATA connector of the HDD from
  wear at each change
• Optional HDD fan (mounting holes on the bottom side of mobile rack)
• OS independent, no driver installation necessary

System requirements

• For external using:
  PC or laptop with a free Power Over eSATA port (optional eSATAp cable item 84397 /
  84396 / 84432)
• For internal using:
  1 SATA data cable
  PC with a free SATA port
  Power supply with a free SATA power connector

Package content

• Mobile Rack
• 1 x 2.5″ hard drive protective film
• Screws
• User manual


• Retail Box

Here you can find information about NSS

My Samsung SSD won't be detected, how do I have to change my system settings? Please check your BIOS settings.
Please adjust your configuration as follows (as far as those menu items are available, which might not be the case with some older motherboard models):
1. AHCI Mode enabled
2. HotSwap Function enabled
3. SSD Mode enabled
4. Hard Disk S.M.A.R.T enabled
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.