Delock Interrupteur de prise WLAN MQTT avec surveillance d’énergie

N° produit 11827
11827 Delock Interrupteur de prise WLAN MQTT avec surveillance d’énergie
11827
11827
11827
11827
11827 Delock Interrupteur de prise WLAN MQTT avec surveillance d’énergie small 1
11827 small 2
11827 small 3
11827 small 4
11827 small 5

Description

Cette prise de courant à interrupteur de Delock peut être contrôlée par un bouton ou le WLAN. Avec le micrologiciel Tasmota installé, l’interrupteur peut être facilement intégré dans les systèmes existants pour l’automation de la maison, IoT ou M2M. A l’aide de l’interface Web, la prise de courant peut être contrôlée sans avoir à compter sur le Cloud ou une appli.

Surveillance de la consommation d’énergie
En un regard, la consommation actuelle d’énergie peut être déterminée. Cela permet d’évaluer l’économie d’énergie et les coûts, et de détecter des conditions de fonctionnement inhabituelles.


Spécifications techniques

  • Connecteurs :
    1 x fiche CEE 7/4
    1 x prises CEE 7/3
  • Commutateur avec 2 LED couleur
  • Interface Web
  • Minuterie programmable
  • Surveillance d’énergie :
    Tension, intensité et puissance
    Consommation en kilowatt heure
  • Prend en charge MQ Telemetry Transport (MQTT), Domoticz, Home Assistant
  • Prend en charge Alexa
  • Chipset : ESP8285
  • Compatible avec IEEE 802.11b/g/n
  • Plage de fréquence : 2,4 GHz
  • Puissance de transmission (EIRP) : 100 mW
  • Approprié pour un usage à l'intérieur
  • Consommation en puissance : maxi. 1,5 W
  • Tension d'entrée : 230 V
  • Intensité : 16 A max.
  • Tension de sortie : max. 2500 W
  • Dimensions sans fiche : diamètre env. 51 mm, hauteur env. 45 mm


Configuration système requise

  • Passerelle WLAN


Contenu de l’emballage

  • Prise de courant à interrupteur WLAN
  • Mode d’emploi


Emballage

  • Retail Box

Technical characteristics
Frequency range
• 2.4 GHz band
Physical characteristics
Diameter
• 51 mm
Height
• 45 mm
Couleur
• blanc
What is the user name for the web interface if a password has been assigned? The default user name is "admin".
The energy monitoring is not accurate. Due to component tolerances and manufacturing, the device allows only an approximate measurement of the power. If necessary, e.g. after a reset, it is possible to obtain a better result by calibration: https://tasmota.github.io/docs/Power-Monitoring-Calibration/
Alternatively you can use a rough estimate with following console commands: CurrentCal 3300, PowerCal 10000, VoltageCal 1650.
How to flash the device to the latest Tasmota version? For the socket switch we use a version of Tasmota, that we have adjusted and tested. Please understand that we can only support this Tasmota version.
What are the changes in firmware 6.7.1? • Fix WeMo emulation for 1G echo and 2G echo dot.
• Add command "time" to disable NTP and set UTC time.
• Removed support for WPS.
What are the changes in firmware 7.2? • Change default GUI to dark theme
• New Arduino Core version
• The LED is now controlled in the same way as Tasmota
• For the hardware configuration a user template is now used.
We recommend you save the device settings and do a "Reset 6" as console command. This will restore the default settings, but keep the WIFI SSID and Password.
Weaker Wi-Fi signal after firmware upgrade The Wi-Fi calibration needs to be deleted to force the device to re-calibrate Wi-Fi after it restarts.
1. Run "reset 3" in the Console (your existing settings will not be affected).
2. The device will restart
3. Cycle the power on the device (unplug and plug it).
Wi-Fi calibration will not be done unless the device performs a cold boot from power up.
Configuration options In case of problems, the following switches can help:
SetOption55 mDNS service 0 = disable 1 = enable
SetOption19 Set Home Assistant discovery protocol 0 = use Tasmota integration (default) 1 = use MQTT discovery
SetOption109 0 = (default) 1 = force gen1 Alexa mode, for Echo Dot 2nd gen devices only
How to reset the energy values? You can enter these console commands to reset the values for today1 / yesterday2 / total3:
"EnergyReset1 0" / "EnergyReset2 0" / "EnergyReset3 0".
The device does not connect to the Wi-Fi If your device does not connect to your Wi-Fi and you've made sure the Wi-Fi credentials are correct, it is caused by using special chars or white spaces in your SSID or Password of your Wi-Fi. Remove them and try again. Other reason can be using an SSID longer than the allowed 32 characters.
Tous les noms et images mentionnés ici sont la propriété de leur fabricant respectif. Sous réserve d’erreurs et de modifications.