Delock IoT LoRa Radio Module 868 MHz 30 dBm TTL (3.3 V) pin header male > SMA jack

Número de elemento 12593
12593 Delock IoT LoRa Radio Module 868 MHz 30 dBm TTL (3.3 V) pin header male > SMA jack
12593
12593 Delock IoT LoRa Radio Module 868 MHz 30 dBm TTL (3.3 V) pin header male > SMA jack small 1
12593 small 2
Este producto ya no está disponible nunca más.

Descripción

This highly energy-efficient IoT LoRa radio module by Delock is suitable for LPWAN, M2M, IoT or Industry 4.0 applications. Via the UART TTL interface components such as sensors, controllers, GNSS trackers, LoRaWAN gateways etc. can be equipped with this LoRa compatible radio module. Due to the flexible output power of the module, a wide spectrum of antennas and thus a large transmission / reception range is possible.

The LoRa data are always transmitted encrypted in a secure radio network and thus remain protected from unauthorized access.
Energy efficiency
The IoT LoRa module supports four energy-saving modes and, with its very low power consumption (5 μA), is suitable for use with rechargeable batteries.

RF output power
There are four power levels available on the RF output of the IoT LoRa module for the antenna.

Forward Error correction (FEC)
The module can detect radio interference automatically and actively prevent transmission errors. This ensures error-free data transmission and secures the range of the transmission.


Especificación técnica

  • Connectors:
    1 x SMA jack
    1 x 7 pin pin header male
  • Pitch: 2.54 mm
  • Chipset: Semtech SX1276
  • Interface: UART TTL (3.3 V)
  • FIFO: 2 x 512 byte
  • Frequency range: 862 - 893 MHz
  • Channels: 32
  • Sensitivity: -147 dBm @ 2,4 Kbps
  • Transmission power: 21 - 30 dBm
  • Air data rate: 0.3, 1.2, 2.4, 4.8, 9.6, 19,2 Kbps
  • Energy modes: (Normal, Wake-up, Power-saving, Sleep)
  • Supports WOR (Wake On Radio)
  • Supports FEC (Forward Error Correction)
  • Power supply: 3.3 - 5.2 V
  • Current consumption: 600mA@30dBm
  • Operating temperature: -40 °C ~ 85 °C
  • Relative humidity: 10 - 90 % (non condensing)
  • Dimensions (LxWxH): ca. 55.7 x 24.0 x 14.2 mm
  • Weight: ca. 8.4 g


Requisitos del sistema

  • Antenna with SMA connector
  • Controller with TTL (3.3 V) interface


Contenido del paquete

  • Module


Paquete

  • Box

Interface
Conector 1
• 1 x SMA hembra
Conector 2
• 1 x 7 pin pin header
Technical characteristics
Data flow control
• AUX
Conjunto de chips
• Semtech SX1276
Velocidades de transferencias de datos
• up to 115,2 Kb/s
FIFO
• 2 x 512 Byte
Frequency range
• 862 - 893 MHz
Impedanciaios
• 50 Ohm
Storage temperature
• -40 °C - 125 °C
Temperatura de funcionamiento
• -40 °C ~ 85 °C
Humidity
• 10 ~ 90 %
Interface
• UART
Power handling
• 1 W
Data transmission
• Bi-directional
Voltaje
• 3,2 V - 5,2 V
Current consumption
• 4.0 µA - 300 mA
UART
• UART TTL
Physical characteristics
Weight
• 6.7 g
Thread length
• 11,0
Acabado del conector
• chapado en oro
Longitud
• 55.7 mm
Width
• 24 mm
Height
• 14,2 mm
Color
• amarillo
Todos los nombres y símbolos aquí mencionados son propiedad de sus respectivos productores. Exceptuando errores, errores de impresión y cambios.