ProductsExternal EnclosureWhole category42622 Delock External Dual Enclosure for 2 x 2.5″ SATA HDD / SSD with USB Type-C™ female transparent - tool free

Delock External Dual Enclosure for 2 x 2.5″ SATA HDD / SSD with USB Type-C™ female transparent - tool free

Item No. 42622
picture
picture
picture
picture
picture
picture
picture
picture
prev 1
prev 2
prev 3
prev 4
prev 5
prev 6
prev 7
prev 8
buy now

Description

This plastic enclosure by Delock is used for the installation of two 2.5″ SATA hard drives or SSDs. Despite the slim design, hard disks up to a height of 9.5 mm can be installed. The included USB Type-C™ to USB Type-A cable allows the connection to a free USB Type-A female port.

Transparent enclosure with stand
The sturdy, transparent plastic housing provides a view inside to quickly see which memory is inside. A stand is supplied for vertical operation.

HDD / SSD installation without tools
The special feature of this enclosure is that no tools are required to install the HDD. The lid can be pushed backwards by a little pressure, the HDD will be attached to the SATA port and then the lid is reattached until it locks.


Specification

• Connectors:
  external:
  1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ female
  1 x DC jack
  internal:
  2 x SATA 6 Gb/s 22 pin receptacle
• Suitable for 2.5″ SATA HDD / SSD:
  HDD height up to 9.5 mm
  SATA HDD / SSD up to 6 Gb/s
  supports 5 V HDD / SSD
  HDD / SSD up to 4 TB
• Chipset: JMicron JMS561U
• Data transfer rate:
  SuperSpeed USB 5 Gbps,
  Hi-Speed 480 Mbps,
  Full-Speed 12 Mbps,
  Low-Speed 1.5 Mbps
• LED indicator for power and access
• Transparent plastic housing
• Dimensions (LxWxH): ca. 154 x 82 x 26 mm
• Hot Swap, Plug & Play


Power supply specification

• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.4 A
• Output: 5 V / 2 A
• Ground outside, plus inside
• Dimensions:
  inside: ø ca. 2.5 mm
  outside: ø ca. 5.5 mm
  length: ca. 10 mm


System requirements

• Chrome OS 74.0 or above
• Linux Kernel 3.4 or above
• Mac OS 10.14.5 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port


Package content

• 2.5″ external enclosure
• Cable USB-C™ male to USB Type-A male, length ca. 1 m
• Stand
• Power supply
• User manual


Package

• Retail Box

General
Function
• Hot Swap
• Plug & Play
Suitable for data medium
• 2.5″
• SSD or HDD
• height up to 9.5 mm
Supported operating system
• Windows 7 32-bit
• Windows 7 64-bit
• Windows 8.1 32-bit
• Windows 8.1 64-bit
• Windows 10 32-bit
• Windows 10 64-bit
• Mac OS 10.14.5 or above
• Linux Kernel 3.4 or above
• Chrome OS 74.0 or above
Interface
External
• 1 x DC jack 5.5 mm x 2.5 mm
• 1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ female
Internal
• 2 x SATA 22 Pin Buchse
Technical characteristics
Chipset
• JMicron JMS561
Physical characteristics
Housing material
• Plastic
Cable length
• 1 m
Length
• 154 mm
Width
• 82 mm
Height
• 26 mm
Colour
• transparent
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.