Delock Converter RS-232 > RS-232 with 3 kV Isolation 600 W power surge

Articolo n. 62500
62500 Delock Converter RS-232 > RS-232 with 3 kV Isolation 600 W power surge
62500
62500
62500
62500
62500 Delock Converter RS-232 > RS-232 with 3 kV Isolation 600 W power surge small 1
62500 small 2
62500 small 3
62500 small 4
62500 small 5
Strumento adattatore

Descrizione

This RS-232 to RS-232 isolator by Delock is designed to protect the connected components from electrostatic discharges and power surge. In addition, the galvanic isolation avoids data transmission errors by uneven ground voltages. Power can be provided through the serial interface or the included power supply. DIN rail mounting is supported.


Specifiche

  • Connector:
    Host: 1 x D-Sub 9 pin Serial RS-232 female
    Device: 1 x D-Sub 9 pin Serial RS-232 male
    1 x DC 1.3 x 3.5 mm female
  • Data transfer rate up to 1 Mbps
  • Data Bit: 5, 6, 7, 8
  • Stopp Bit: 1, 1.5, 2
  • Parity: None, Even, Odd, Space, Mark
  • Signals: TXD, RXD, CTS, RTS, DCD, DSR, DTR
  • LED indicators for status TX / RX and power supply
  • Galvanic isolation 3 kV (optical isolation)
  • 600 W power surge for the RS-232 interfaces
  • 600 W power surge at the DC Connector
  • ± 15 kV ESD protection for all signal pins
  • Power supply RS-232 interface pin 9: 12 V (optional)
  • Power supply: 10 - 30 V
  • Power consumption: ca. 50 mA
  • Operating temperature: - 30 °C ~ 75 °C
  • Relative humidity: 5 ~ 95 % (not condensing)
  • Storage temperature: - 40 °C ~ 85 °C
  • Housing material: plastic
  • Dimensions (LxWxH): ca. 88 x 54 x 22 mm
  • Accessories for mounting on 35 mm DIN rails


Specifiche dell'alimentatore

  • Wall power supply
    Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.48 A
    Output: 12 V / 1.6 A
  • Ground outside, plus inside
  • Dimensions:
    inside: ø ca. 1.3 mm
    outside: ø ca. 3.5 mm
    length: ca. 9.5 mm


Requisiti di sistema

  • Devices with RS-232 interfaces


Contenuto della confezione

  • Converter
  • Power supply
  • Mounting set for DIN rail
  • User manual


Pacchetto

  • Box

General
Function
• optical isolation
Mounting type
• DIN rail 35 mm
Specification
• RS-232 (EIA / TIA)
Supported operating system
• Indipendente dal sistema operativo, nessuna installazione driver necessario
Indicatore LED
• PWR / RXD / TXD
Protection
• ESD (Electrostatic Discharge)
• Surge Protection 600 W
Interface
Connettore 1
• 1 x RS-232 DB9 seriale maschio
Connettore 2
• 1 x RS-232 DB9 seriale femmina
connector 3
• 1 x jack CC
Technical characteristics
Data transfer rate
• up to 921.6 Kbps
Temperatura di esercizio
• -30 °C ~ 75 °C
Humidity
• 5 ~ 95 %
Signal transmission
• TxD, RxD, RTS, CTS, DTR, DSR, DCD
Data transmission
• asynchronous
• full duplex
Voltage
• Power supply: 10 - 30 V
• Optional PIN 9: 12 V
Current consumption
• 50 mA
Physical characteristics
Materiale custodia
• Plastica
Tipo di vite
• #4-40 UNC
Lunghezza
• 80 mm
Width
• 54 mm
Height
• 22 mm
Colour
• nero
Overvoltage protection
• 15 kV
Isolante
• 3 kV
Power supply
Type
• Euro wall power supply
Connector
• CC maschio 3,5 mm x 1,35 mm
Tutti i nomi e i simboli citati qui sono di proprietà dei rispettivi produttori. Salvo errori di stampa, modifiche ed errori.