ProductsAdapter / ConverterWhole category62731

Delock 2.5″ Converter USB 3.1 Micro-B female > M.2 / mSATA with enclosure

Item No. 62731
picture
picture
picture
picture
picture
Description This Delock converter enables the connection of a M.2 SSD in 2280, 2260, 2242 and 2230 format or an mSATA SSD in half size or full size format. If both slots are occupied, only the M.2 SSD can be used. The converter can be installed into the system through the USB interface.
Specification • Connector:
  1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type Micro-B female >
  1 x 67 pin M.2 key B slot
  1 x mSATA slot (half size / full size)
• Interface: SATA
• Form factor: 2.5″
• Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key B or key B+M based
  on SATA
• Maximum height of the components on the module: 1.35 mm application of double-sided
  assembled modules supported
• LED indicator
• Maximum current for M.2 module: 3 A
• Short circuit protection, over heating protection
• ESD protection up to 2 Kv
• Dimensions (LxWxH): ca. 100 x 70 x 9 mm

System requirements • Windows 7/7-64/8.1/8.1-64/10/10-64, Linux ex Kernel 4.6
• A free USB interface

Package content • Converter
• 2.5″ enclosure
• Fixing screws for M.2 module, mSATA module and enclosure
• USB cable, length ca. 35 cm
• Cooling pad for M.2 and mSATA module
• User manual

Package • Retail Box

Here you can find information about M.2
General
Form factor
• 2.5"
Slot
• SATA
Supported module
• M.2 modules in format 2280, 2260, 2242 and 2230 with key B or key B+M based on SATA
Maximum height of the components on the module
• 1.35 mm application of double-sided assembled modules supported
Interface
Connector 1
• 1 x USB 3.1 Gen 2 Type Micro-B female
Connector 2
• 1 x 67 pin M.2 key B slot
connector 3
• 1 x mSATA slot (half size / full size)
Physical characteristics
Length
• 100 mm
Width
• 70 mm
Height
• 9 mm
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
To the top