Delock Adapter cable USB Type-A to Serial RS-232 RJ12 with ESD protection Leadshine 2 m

Numer artykułu 66737
66737 Delock Adapter cable USB Type-A to Serial RS-232 RJ12 with ESD protection Leadshine 2 m
66737
66737
66737 Delock Adapter cable USB Type-A to Serial RS-232 RJ12 with ESD protection Leadshine 2 m small 1
66737 small 2
66737 small 3
Narzędzie Adaptery Narzędzia Przewody

Opis

This USB to serial RS-232 RJ12 adapter cable by Delock is suitable with the ProTuner software for configuration, control, monitoring etc. of the servo and stepper motors by Leadshine.

Compatible Devices:
Stepper motors:
DM432C, DM442, DM556, DM856 3DM683 AM882 DM1182 DM2282
Servomotors:
DCS810, DCS810S, ACS306, ACS606, ACS806
 


Specyfikacja

  • Connectors:
    1 x USB 2.0 Type-A male
    1 x Serial RS-232 RJ12 plug
  • Chipset: FTDI FT231X
  • Plug & Play
  • ESD protection:
  • FIFO: 512 Byte - TX
  • FIFO: 512 Byte - RX
  • Compatible with USB 3.0, USB 2.0, and USB 1.1 full speed 12 Mbps
  • Data transfer rate up to 230.4 Kb/s
  • Signals: RXD(3), GND(4), TXD(5)
  • ESD protection IEC 61000-4-2
    HCP & VCP: ±4 kV
    Air Discharge: ±8 kV
    Contact Discharge: ±4 kV
  • Colour: black
  • Cable length incl. connectors: ca. 2.0 m
  • Suitable for various devices by Leadshine


Wymagania systemowe

  • Windows 8.1/8.1-64/10/10-64/11
  • PC or laptop with a free USB Type-A port


Zawartość opakowania

  • Adapter cable USB 2.0 Type-A to RS-232 RJ12


Opakowanie

  • Torba na zamek błyskawiczny

General
Specyfikacja
• RS-232 (EIA / TIA)
• USB 2.0
Supported operating system
• Windows 10 32-bit
• Windows 10 64-bit
• Windows 8.1 32-Bit
• Windows 8.1 64-Bit
Interface
Złącze 1
• 1 x USB 2.0 Typ-A męski
Złącze 2
• 1 x RJ12 męski
Technical characteristics
Chipset
• FTDI FT231XS
Szybkość transmisji danych
• bis zu 230,4 Kbps
FIFO
• 2 x 512 Byte
Signal transmission
• TxD, RxD und GND
UART
• USB to serial UART
Physical characteristics
Cable length incl. connector
• 2 m
Kolor
• czarny
Overvoltage protection
• ±8 kV EN / IEC 61000-4-2 Air Gap Discharge
• ±4 kV EN / IEC 61000-4-2 Contact Discharge
• ±4 kV EN / IEC 61000-4-2 VCP & HCP
Wszelkie pojawiające się tutaj nazwy i znaki należą do ich odpowiednich właścicieli. Błędy drukarskie, zmiany & pomyłki zastrzeżone.