Converter USB 2.0 male > TTL 6 Pin WR-WTB 2,2 m (3,3 V)

Description

This USB TTL converter by Delock is, due to its wide temperature range, most suitable for industrial applications. It can be used for connection to e.g. level shifters, interface controllers, micro controllers etc.

Specification

• Connectors:
  1 x USB 2.0 Type-A male >
  1 x Serial TTL 6 Pin WR-WTB pitch 1,5 mm
• Pin assignment:
  1. VCC
  3. TXD
  4. RXD
  6. GND
• Chipset: FTDI FT232R
• Cable gauge: 26 AWG
• Cable diameter: ca. 5 mm
• Operating temperature: -20 °C ~ 80 °C
• No-load current: 70 uA
• Converter: 5 V / 15 mA (VCC, GND)
• Compatible to UHCI / OHCI / EHCI controller
• LVTTL 3.3 V (data) / 4 mA or HighLevel 12 mA
• Data transfer rate up to 3 Mbps
• Databits: 7 or 8
• Stoppbits: 1 or 2
• Parity: none, space, even, odd, mark
• Flow control: software XON / XOFF or hardware RTS / CTS
• FIFO:
  128 Byte - RX
  256 Byte - TX
• Length without connectors: ca. 2.2 m

System requirements

• Windows XP/XP-64/Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64, Windows CE 4.2, 5.0, 6.0,
  Mac OS 10.5, 10.6, Mac OS ex 10.9, Linux ex Kernel 2.6
• PC or laptop with a free USB Type-A port

Package content

• USB TTL cable

Package

• Zip poly bag