Cable DC 5.5 x 2.1 mm male to open wire ends 30 cm

Item No. 85740

buy now

Description

This terminal block cable by Delock can be used to connect bare wires. Thus the cable is not only convenient for special industry applications, but also for the hobby area, e.g. railway modelling. Various devices with a suitable DC power connector can be connected to the cable and are supplied with power individually (depending on the requirements of the device).

Specification

• Connectors:
1 x DC 5.5 x 2.1 mm male >
2 x open wires
• Positive pole inside, negative pole outside
• Voltage: max. 12 ~ 36 V
• Current: max. 5 A
• Cable gauge: 23 AWG
• DC pin length: ca. 9.5 mm
• Length without connectors: ca. 30 cm

System requirements

• A free DC female port 5.5 x 2.1 x 9.5 mm

Package content

• Cable

Package

• Zip poly bag

Interface

connector

• 1 x DC 5.5 x 2.1 x 9.5 mm male

Connector 1

• 2 x open wires

Technical characteristics

Maximum current

• 5 A

Voltage

• max. 12 ~ 36 V

Physical characteristics

Conductor material

• copper

Conductor gauge

• 23 AWG

Cable length without connectors

• 30 cm

other lengths:

Delock Cable DC 5.5 x 2.1 mm male to open wire ends 50 cm

Item No. 85741

Delock Cable DC 5.5 x 2.1 mm male to open wire ends 15 cm

Item No. 85739

similar items

Delock Cable DC 5.5 x 2.1 mm male to open wire ends 15 cm angled

Item No. 85742

Delock Cable DC 5.5 x 2.1 mm male to open wire ends 30 cm angled

Item No. 85743

Delock Cable DC 5.5 x 2.1 mm male to open wire ends 50 cm angled

Item No. 85744

Delock Cable DC 5.5 x 2.5 mm male to open wire ends 15 cm

Item No. 85745

Delock Cable DC 5.5 x 2.5 mm male to open wire ends 15 cm angled

Item No. 85748

Delock Cable DC 5.5 x 2.5 mm male to open wire ends 30 cm

Item No. 85746

Delock Cable DC 5.5 x 2.5 mm male to open wire ends 30 cm angled

Item No. 85749

Delock Cable DC 5.5 x 2.5 mm male to open wire ends 50 cm

Item No. 85747

Delock Cable DC 5.5 x 2.5 mm male to open wire ends 50 cm angled

Item No. 85750

All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.