ProductsMultimediaWhole category87666 Delock DisplayPort 1.2 Splitter 1 x DisplayPort in > 2 x HDMI out

Delock DisplayPort 1.2 Splitter 1 x DisplayPort in > 2 x HDMI out

Item No. 87666
picture
picture
picture

Description

This splitter by Delock is suitable for the connection of two HDMI monitors to a computer with DisplayPort interface. Two monitors can be operated simultaneously at the outputs.


Note

The product is a Multi-Stream-Transport (MST) hub and supports the extended desktop configuration of Displayport 1.2. When Mac OS is used, the same image is displayed on both ports (mirrored), it is not possible to use both ports independently of each other.


Specification

• Connectors:
  Input:
    1 x DisplayPort 20 pin male
  Output:
    2 x HDMI-A 19 pin female
• Chipset: STDP4320
• DisplayPort 1.2a and High Speed HDMI specification
• Active converter, Single / Multi Stream Transport Hub (SST / MST)
• Functions: Mirrored or Extended (Windows only)
• Maximum resolution (depending on the system and the connected hardware):
  DisplayPort 1.1 or 1.2 Single Stream Transport (SST):
  up to 1920 x 1080 @ 60 Hz (mirror)
  DisplayPort 1.2 Multi Stream Transport (MST):
  up to 3840 x 2160 @ 30 Hz (mirror or extended)
• Supports 3D displays
• Supports HDCP 1.3
• Supports Eyefinity / Single Large Surface (SLS)
• Audio input formats: 7.1 channel up to 192 kHz sample rate
• Metal housing
• Colour: black
• Cable length without connectors: ca. 30 cm
• Dimensions (LxWxH): ca. 100 x 67 x 23 mm


System requirements

• Windows 7/7-64/8.1/8.1-64/10/10-64, Mac ex OS 10.12
• One free DisplayPort female


Package content

• DisplayPort Splitter
• User manual



Here you can find information about DisplayPort

General
Specification
• DisplayPort 1.2a
• High Speed HDMI
Interface
Output
• 2 x HDMI-A 19 pin female
Input
• 1 x DisplayPort 20 pin male
Technical characteristics
Chipset
• STDP4320
Maximum screen resolution
• 3840 x 2160 @ 30 Hz
Physical characteristics
Housing material
• metal
Cable length incl. connector
• 30 cm
Length
• 100 mm
Width
• 67 mm
Height
• 23 mm
Colour
• black
Extended Desktop The splitter is a Multi-Stream-Transport (MST) hub and supports extended desktop configuration. MST mode is only available on DisplayPort 1.2 graphics cards. The splitter will show the same image (mirror) on both outputs if a graphics card with Displayport 1.1 is used.
Maximum Resolution A single Displayport 1.2 connection has a limit amount of bandwidth. This limits the number of displays that can be connected through an MST hub depending on the displays resolution, timing and refresh rate. Please see below for bandwidth usage of different resolutions:
1920 x 1080 @ 60 Hz uses 22%, 1920 x 1200 @ 60 Hz uses 30% bandwidth
2560 x 1440 @ 60 Hz uses 35%, 2560 x 1600 @ 60 Hz uses 38% bandwidth
3840 x 2160 @ 30 Hz uses 43%, 3840 x 2160 @ 60 Hz uses 95% bandwidth
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.

To the top