Delock PCI Express Card to 2 x Serial with voltage supply

Description

The Delock PCI Express card expands your PC by two external serial ports. The serial ports support a voltage of 5 V and 12 V, which can be set through the jumper. Thus you do not require an additional power supply for the connected devices.

Specification

• Chipset: Oxford OXPCIe952
• Connector: 2 x serial RS-232 DB9 male
  1 x internal power connector 4 pin Molex male
• Serial connector will be lead outside through a cable
• Data transfer rate up to 230.4 Kb/s
• Compatible with 16C950 UART
• FIFO: 128 byte
• ±15KV ESD protection on all signal pins
• 5 V or 12 V voltage can be set individually for each port through
  the jumper (Pin 1/4/8/9)
• Electrical power per port: 5.5 watt (5 V / 1.1 A)
• Electrical power per port: 13.2 watt (12 V / 1.1 A)
• I/O address and IRQ assigned by BIOS
• PCI Express x1, V1.1

System requirements

• Windows XP/XP-64/Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64
• PC with one free PCI Express Slot
• Power supply with a free Molex power connector

Package content

• PCI Express Karte
• 1 serielles Anschlusskabel
• Low Profile Blende
• Treiber CD
• Bedienungsanleitung

Package

• Retail Box

Here you can find information about PCIe cards with serial RS-232 interfaces inclusive power supply

Here you can find information about RS-232