Delock PCI Express Card to 2 x Serial with voltage supply

Tételszám 89305
89305 Delock PCI Express Card to 2 x Serial with voltage supply
89305
89305
89305
89305 Delock PCI Express Card to 2 x Serial with voltage supply small 1
89305 small 2
89305 small 3
89305 small 4
Ez a termék már nem kapható.

Leírás

The Delock PCI Express card expands your PC by two external serial ports. The serial ports support a voltage of 5 V and 12 V, which can be set through the jumper. Thus you do not require an additional power supply for the connected devices.


Műszaki adatok

  • Chipset: Oxford OXPCIe952
  • Connector: 2 x serial RS-232 DB9 male
    1 x internal power connector 4 pin Molex male
  • Serial connector will be lead outside through a cable
  • Data transfer rate up to 230.4 Kb/s
  • Compatible with 16C950 UART
  • FIFO: 128 byte
  • ±15KV ESD protection on all signal pins
  • 5 V or 12 V voltage can be set individually for each port through
    the jumper (Pin 1/4/8/9)
  • Electrical power per port: 5.5 watt (5 V / 1.1 A)
  • Electrical power per port: 13.2 watt (12 V / 1.1 A)
  • I/O address and IRQ assigned by BIOS
  • PCI Express x1, V1.1


Rendszerkövetelmények

  • Windows XP/XP-64/Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64
  • PC with one free PCI Express Slot
  • Power supply with a free Molex power connector


A csomag tartalma

  • PCI Express Karte
  • 1 serielles Anschlusskabel
  • Low Profile Blende
  • Treiber CD
  • Bedienungsanleitung


Csomag

  • Retail Box

General
Formatényező
• alacsony profilú
Funkció
• Power over Serial
Műszaki adatok
• RS-232 (EIA / TIA)
• PCIe 1.1
Supported operating system
• Windows 10 32-bit
• Windows 10 64-bit
• Windows 7 32-Bit
• Windows 7 64-Bit
• Windows 8 32-bit
• Windows 8 64-bit
• Windows 8.1 32-Bit
• Windows 8.1 64-Bit
• Windows Vista 32-bit
• Windows Vista 64-bit
• Windows XP 32-bit
• Windows XP 64-bit
Slot
• PCIe
Interface
Külső
• 2 x soros RS-232 DB9 dugó
Belső
• 1 x PCI Express x1, V1.1
Technical characteristics
Lapkakészlet
• Oxford OXPCIe952
Sebességű adatátvitel
• 4 x up to 230,4 Kbps
FIFO
• 4 x 128 Byte
Jumper
• 8 x
Maximum current
• 1100 mA per port
Feszültség
• Az 5 V és 12 V feszültséget jumper segítségével lehet beállítani minden csatlakozó esetében (1 és 9 sz. tű).
UART
• 16C950
Az itt megemlített nevek és szimbólumok a megfelelő gyártók tulajdonát képezik (a változtatások, nyomtatási hibák és egyéb hibák kivételt jelentenek).