ProdottiCard ReaderTutta la categoria91494

Delock 5.25″ USB 3.0 Card Reader 5 slot + 4 port USB 3.0 Hub incl. V / A indicator and fan control

Articolo n. 91494

91494 Delock 5.25″ USB 3.0 Card Reader 5 slot + 4 port USB 3.0 Hub incl. V / A indicator and fan control small

Questo prodotto non è più disponibile.

Panoramica Dettagli tecnici Documenti

Descrizione

This card reader by Delock can be installed into a 5.25″ bay of a PC and will be connected to an internal USB 3.0 pin header male port. It has a 5 slot card reader and enables the connection of up to four USB devices, which the USB 3.0 hub provides. The LED display indicates the current rating and voltage values of the connected USB devices. In addition, the card reader has a slider for fan control.

Specifiche

• Connector:
external:
    5 x Card Reader slots
    4 x USB 3.0 Type-A female
internal:
    2 x USB 3.0 Type-A male
    1 x 4 pin power connector
    1 x 3 pin fan pin header male
• 1 slider for fan control
• 1 push button to select the USB port, which indicates voltage (V) and current (A)
• Chipset: GL3522 (Hub), GL3223 (Card Reader)
• Plastic housing for installation into a 5.25″ bay
• Data transfer rate up to 5 Gb/s
• 4 port USB 3.0 hub supports USB Battery Charging BC 1.2 specification
• LED indicator for the card reader for power (green) and access (red)
• Cable data:
2 x USB 3.0 Type-A female to 1 x 19 pin USB 3.0 pin header female
        ca. 58 cm (incl. connector)
1 x 4 pin power cable ca. 33 cm (incl. connector)
• Hot Swap, Plug & Play

• Supports following memory cards:

Slot 1 Compact Flash / Micro Drive	CF I, CF II, CF Extreme, CF Extreme III, CF Extreme IV, Micro Drive
Slot 2 Memory Stick	MS, High Speed Memory Stick (HS MS), MS PRO, MS PRO-HG, Memory Stick XC, MS Duo, MS PRO Duo, MS PRO Duo Mark2, MS PRO-HG, MS PRO-HG Duo, MS PRO-HG Duo HX, MS Micro, MS PRO Micro, MS-HG Micro, MS XC-HG Micro, M2*
Slot 3 xD	xD, xD type M, xD type H
Slot 4 Micro SD	microSD, Micro SDHC, Micro SDHC Ultra, T-Flash
Slot 5 Secure Digital / Multi Media Card	SD, SD Ultra, SD High Capacity (SDHC), SD Ultra, SDHC Ultra, SDXC, SDXC Ultra, MMC, miniSD, MMCmobile, RS-MMC

*Adapter is required

Requisiti di sistema

Windows 7/7-64/8/8-64/8.1/8.1-64/10/10-64, Linux Kernel 3.7
PC with one free 5.25″ bay
Mainboard with a free 19 pin USB 3.0 pin header male
Power supply with a free 4 pin power connector
Fan with a free 3 pin fan control connection cable

Contenuto della confezione

5.25″ Card Reader
2 x cable
Screws
User manual

Pacchetto

Retail Box

General

Fattore di forma

• 5.25"

Function

• Hot Swap
• Plug & Play

Supported operating system

• Linux Kernel 3.7 o superiore
• Windows 10 32-bit
• Windows 10 64-bit
• Windows 7 32-Bit
• Windows 7 64-Bit
• Windows 8 32-bit
• Windows 8 64-bit
• Windows 8.1 32-Bit
• Windows 8.1 64-Bit

Indicatore LED

• V / A indicator for hub

Interface

External

• 1 x slot CF
• 1 x slot MS
• 1 x slot Micro SD
• 1 x slot SD
• 1 x slot xD
• 4 x USB 5 Gbps Tipo-A femmina

Internal

• 2 x USB 5 Gbps Type-A male
• 1 x connettore di alimentazione a 4 pin
• 1 x 3 pin fan pin header male

Technical characteristics

Chipset

• Genesys Logic

Data transfer rate

• USB 10 Gbps up to 10 Gb/s

Physical characteristics

Colour

• nero

Tutti i nomi e i simboli citati qui sono di proprietà dei rispettivi produttori. Salvo errori di stampa, modifiche ed errori.