Delock External Enclosure for 2 x 2.5″ SATA HDD / SSD with RAID + 3 Port USB 3.0 Hub

Description

The aluminium enclosure by Delock enables the installation of up to two 2.5″ SATA HDDs / SSDs. When using more than one SSD, there is the possibility to use different RAID level. Additional the enclosure has a USB 3.0 hub with 3 ports on its front. The enclosure can be connected via USB Type-A to the PC or laptop.

Note

If you plug in or unplug a device during operation, it may cause all other connected devices need to reconnect.

Specification

• Connectors:
  external:
  back side:
  1 x USB 3.0 Type-B female
  1 x DC 12 V power connector
  front side:
  2 x USB 3.0 Type-A female
  1 x USB 3.0 Type-A female - Battery Charging specification BC1.2
  internal:
  2 x SATA 6 Gb/s 22 pin receptacle
• Chipset: VIA VL813, JMicron JMS561
• Data transfer rate up to:
  SuperSpeed USB 5 Gbps,
  Hi-Speed 480 Mbps,
  Full-Speed 12 Mbps,
  Low-Speed 1.5 Mbps
• Supports RAID 0, RAID 1, JBOD, Port Multiplier
• LED indicator for power, access and RAID mode
• 1 x On / Off switch
• 1 x on / off switch for the fan
• 1 x Reset button
• 1 x DIP switch for RAID mode
• Metal housing
• Colour: black
• Dimensions (LxWxH): ca. 135 x 99 x 59 mm
• Hot Plug, Plug & Play

Power supply specification

• Wall power supply
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.6 A
• Output: 12 V / 2 A
• Ground outside, plus inside
• Dimensions:
  inside: ø ca. 2.1 mm
  outside: ø ca. 5.5 mm
  length: ca. 9.5 mm

System requirements

• Chrome OS
• Linux Kernel 3.3 or above
• Mac OS 10.13.6 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port

Package content

• External enclosure
• 1 x cable USB 3.0 A male to USB 3.0 B male, length ca. 1 m
• Power supply
• Screws
• User manual

Package

• Retail Box