Delock DIP sliding switch 12-digit 2.54 mm pitch THT vertical blue 10 pieces
Description
This DIP sliding switch by Delock is suitable for the through-hole mounting on a PCB.
THT Assembly Technology
The attached soldering pins on the DIP switch can be inserted through contact holes on a PCB and soldered from the bottom side. The switching rows are used to set configurations and to change parameters.
Multifunctional application
The DIP switch is mainly used in telecommunications, computers and measuring.
Specification
- Connectors:
2 x 12 soldering pin - Number of positions: 12
- Pitch: 2.54 mm
- Switch position: on / off
- Switching rating: 25 mA, 24 VDC
- Insulation resistance: 100 MΩ / 500 VDC
- Withstanding voltage: 300 VAC / 1 minute
- Soldering temperature: 250 °C for ca. 3 - 5 seconds
- Mechanical life: 2000 cycles
- Environmental temperature: -40 °C ~ 85 °C
- Operating temperature: -40 °C ~ 85 °C
- Material: plastic
- Colour: blue
- Dimensions (LxWxH): ca. 31.9 x 9.9 x 5.5 mm
Package content
- 2 x DIP sliding switch
Package
- Tube
General
Mounting type
• Soldering
Interface
connector
• 2 x 12 soldering pin
Technical characteristics
Storage temperature
• -40 °C ~ 85 °C
Operating temperature
• -40 °C ~ 85 °C
Resistor
• 100 MΩ / 500 VDC
Physical characteristics
Pitch distance
• 2.54 mm
Material
• Plastic
Length
• 31.9 mm
Width
• 9.9 mm
Height
• 5.5 mm
Switch
• On / Off
Colour
• blue
10.02.2020
Datenblatt
10.02.2020
Data sheet
10.02.2020
Dane produktu
10.02.2020
Popis produktu
10.02.2020
Feuille de données
10.02.2020
Hoja de datos
10.02.2020
Datablad
10.02.2020
Adatlap
10.02.2020
Kataloški list
10.02.2020
Φύλλο δεδομένων
10.02.2020
Scheda tecnica
10.02.2020
Fișă cu date
29.01.2020
Technical drawing
176.45 kB