Delock PCI Express x1 Card to 2 x Serial RS-422/485 with 15 kV ESD protection

Item No. 90048
90048 Delock PCI Express x1 Card to 2 x Serial RS-422/485 with 15 kV ESD protection
90048
90048
90048
90048 Delock PCI Express x1 Card to 2 x Serial RS-422/485 with 15 kV ESD protection small 1
90048 small 2
90048 small 3
90048 small 4

Description

The PCI Express card by Delock expands a PC by two external serial RS-422/485 ports. Devices such as scanners, protocol converters, POS systems, infrared -, IoT - devices etc. and different modes can be used.
The PCIe card supports 2- and 4-wire operation at both connections for RS-422 and RS-485 devices. In addition, the integrated terminating resistors can optionally be activated, thus avoiding unwanted signal interference.

RS-422 or RS-485 settings
The settings can be set with jumpers on the PCIe card and provide the modes Auto Detect, RS-422 and RS-485 4-wire full duplex and RS-485 2-wire half duplex operation.

Low Profile Form Factor
By using the included low profile bracket, the PCI Express card can be also installed into a Mini-PC.  


Specification

  • Connectors:
    external: 1 x DB44 female
    connecting cable: DB44 male > 2 x serial RS-422/485 DB9 male
    internal: 1 x PCI Express x1, V2.0
  • Chipset: MaxLinear XR17V352, SP3078E
  • Data transfer rate up to 1 Mbps
  • FIFO: 256 byte
  • Compatible with 16C550 UART
  • Data bit: 5, 6, 7, 8
  • Stop bit: 1, 1.5, 2
  • Parity: even, odd, none, mark, space
  • Flow control: XON / XOFF, RTS / DTR, CTS / DSR
  • RS-485 automatic half duplex data flow control
  • Protection for open, short-circuited or terminated input lines
  • Status LEDs: TX, RX
  • ±15 kV ESD protection on all signal pins (HBM)
  • ±15 kV IEC 61000-4-2 Air Gap Discharge
  • ±8 kV IEC 61000-4-2 Contact Discharge
  • I/O address and IRQ assigned by BIOS
  • Optional termination resistor 120 ohms


System requirements

  • Linux Kernel 2.6 or above
  • Windows 8.1/8.1-64/10/10-64/11
  • PC with one free PCI Express slot


Package content

  • PCI Express card
  • 1 serial connecting cable
  • Low profile bracket
  • 4 x jumper
  • Driver CD
  • User manual


Package

  • Box


RS-422 / RS-485 Here you can find information about RS-422 / RS-485

General
Form factor
• Low Profile
Specification
• RS-422 / RS-485 (EIA / TIA)
• PCI Express 2.0
Supported operating system
• Linux Kernel 2.6.38 or above
• Windows 10 32-Bit
• Windows 10 64-Bit
• Windows 8.1 32-Bit
• Windows 8.1 64-Bit
• Windows 11
Slot
• PCIe
Protection
• ESD (Electrostatic Discharge)
Interface
External
• 2 x serial RS-232 DB9 Plug
Internal
• 1 x PCI Express x1, V2.0
Technical characteristics
Chipset
• MaxLinear XR17V352
Data transfer rate
• 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 10000, 14400, 19200, 25000, 38400, 50000, 57600, 100000, 115200, 128000, 200000, 230400, 250000, 460800, 500000, 921600, 1000000, 1152000 and more
FIFO
• 2 x 256 Byte
Jumper
• 6 x
Signal transmission
• Tx+, Tx-, Rx+, Rx-, GND
Data transmission
• Bi-directional
• Half duplex
• full duplex
• differential
UART
• 16C550
Resistor
• Terminalresistor 120 Ω ON/OFF
Physical characteristics
Slot bracket
• Low Profile
• standard
Colour
• black
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.