Delock 3.5″ USB 3.0 Card Reader 5 slot + 4 port USB 3.0 Hub

Item No. 91493
91493 Delock 3.5″ USB 3.0 Card Reader 5 slot + 4 port USB 3.0 Hub
91493
91493
91493
91493
91493 Delock 3.5″ USB 3.0 Card Reader 5 slot + 4 port USB 3.0 Hub small 1
91493 small 2
91493 small 3
91493 small 4
91493 small 5
This product is not available anymore.

Description

This card reader by Delock can be installed into a 3.5″ bay of a PC and will be connected to an internal USB 3.0 pin header male port. It has a 5 slot card reader and enables the connection of up to four USB devices, which the USB 3.0 hub provides.


Specification

• Connector:
  external:
    5 x Card Reader slots
    4 x USB 3.0 Type-A female
  internal:
    1 x 19 pin USB 3.0 pin header female
    1 x 4 pin power connector
• Chipset: GL3522 (Hub), GL3223 (Card Reader)
• Metal housing for installation into a 3.5″ bay
• Data transfer rate up to 5 Gb/s
• 4 port USB 3.0 hub supports USB Battery Charging BC 1.2 specification
• LED indicator for the card reader for power (green) and access (red)
• Cable data:
  1 x 19 pin USB 3.0 pin header female cable ca. 53 cm (incl. connector)
  1 x 4 pin power cable ca. 29 cm (incl. connector)
• Hot Swap, Plug & Play

• Supports following memory cards:

Slot 1
Compact Flash / Micro Drive
CF I, CF II, CF Extreme, CF Extreme III,
CF Extreme IV, Micro Drive
Slot 2
Memory Stick
MS, High Speed Memory Stick (HS MS), MS PRO,
MS PRO-HG, Memory Stick XC, MS Duo,
MS PRO Duo, MS PRO Duo Mark2, MS PRO-HG,
MS PRO-HG Duo, MS PRO-HG Duo HX,
MS Micro*, MS PRO Micro*, MS-HG Micro*,
MS XC-HG Micro*, M2*
Slot 3
xD
xD, xD type M, xD type H
Slot 4
Micro SD
microSD, Micro SDHC, Micro SDHC Ultra, T-Flash
Slot 5
Secure Digital / Multi Media Card
SD, SD Ultra, SD High Capacity (SDHC), SD Ultra, SDHC Ultra, SDXC, SDXC Ultra, MMC, miniSD, MMCmobile, RS-MMC
*Adapter is required


System requirements

  • Linux Kernel 3.10 or above
  • Windows 7/7-64/8.1/8.1-64/10/10-64
  • PC with one free 3.5″ bay
  • Motherboard with a free 19 pin USB 3.0 pin header male
  • Power supply with a free 4 pin power connector


Package content

  • 3.5″ card reader with connection cable
  • Screws
  • User manual


Package

  • Retail Box

General
Form factor
• 3.5"
Function
• Hot Swap
• Plug & Play
Supported operating system
• Linux Kernel 3.10 or above
• Windows 10 32-Bit
• Windows 10 64-Bit
• Windows 7 32-Bit
• Windows 7 64-Bit
• Windows 8.1 32-Bit
• Windows 8.1 64-Bit
Interface
External
• 1 x CF slot
• 1 x MS slot
• 1 x Micro SD Slot
• 1 x SD slot
• 1 x xD slot
• 4 x USB 5 Gbps Type-A female
Internal
• 1 x 19 pin USB 5 Gbps pin header female
• 1 x 4 pin power connector
Technical characteristics
Chipset
• Genesys Logic
Data transfer rate
• USB 10 Gbps up to 10 Gb/s
Physical characteristics
Colour
• black
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.