Delock 5.25″ USB 3.0 Card Reader 5 slot + 4 port USB 3.0 Hub incl. V / A indicator and fan control

Item No. 91494
91494 Delock 5.25″ USB 3.0 Card Reader 5 slot + 4 port USB 3.0 Hub incl. V / A indicator and fan control
91494
91494
91494
91494
91494 Delock 5.25″ USB 3.0 Card Reader 5 slot + 4 port USB 3.0 Hub incl. V / A indicator and fan control small 1
91494 small 2
91494 small 3
91494 small 4
91494 small 5
This product is not available anymore.

Description

This card reader by Delock can be installed into a 5.25″ bay of a PC and will be connected to an internal USB 3.0 pin header male port. It has a 5 slot card reader and enables the connection of up to four USB devices, which the USB 3.0 hub provides. The LED display indicates the current rating and voltage values of the connected USB devices. In addition, the card reader has a slider for fan control.


Specification

• Connector:
  external:
    5 x Card Reader slots
    4 x USB 3.0 Type-A female
  internal:
    2 x USB 3.0 Type-A male
    1 x 4 pin power connector
    1 x 3 pin fan pin header male
• 1 slider for fan control
• 1 push button to select the USB port, which indicates voltage (V) and current (A)
• Chipset: GL3522 (Hub), GL3223 (Card Reader)
• Plastic housing for installation into a 5.25″ bay
• Data transfer rate up to 5 Gb/s
• 4 port USB 3.0 hub supports USB Battery Charging BC 1.2 specification
• LED indicator for the card reader for power (green) and access (red)
• Cable data:
  2 x USB 3.0 Type-A female to 1 x 19 pin USB 3.0 pin header female
        ca. 58 cm (incl. connector)
  1 x 4 pin power cable ca. 33 cm (incl. connector)
• Hot Swap, Plug & Play

• Supports following memory cards:

Slot 1
Compact Flash / Micro Drive
CF I, CF II, CF Extreme, CF Extreme III,
CF Extreme IV, Micro Drive
Slot 2
Memory Stick
MS, High Speed Memory Stick (HS MS), MS PRO,
MS PRO-HG, Memory Stick XC, MS Duo,
MS PRO Duo, MS PRO Duo Mark2, MS PRO-HG,
MS PRO-HG Duo, MS PRO-HG Duo HX,
MS Micro*, MS PRO Micro*, MS-HG Micro*,
MS XC-HG Micro*, M2*
Slot 3
xD
xD, xD type M, xD type H
Slot 4
Micro SD
microSD, Micro SDHC, Micro SDHC Ultra, T-Flash
Slot 5
Secure Digital / Multi Media Card
SD, SD Ultra, SD High Capacity (SDHC), SD Ultra, SDHC Ultra, SDXC, SDXC Ultra, MMC, miniSD, MMCmobile, RS-MMC
*Adapter is required


System requirements

  • Windows 7/7-64/8/8-64/8.1/8.1-64/10/10-64, Linux Kernel 3.7
  • PC with one free 5.25″ bay
  • Mainboard with a free 19 pin USB 3.0 pin header male
  • Power supply with a free 4 pin power connector
  • Fan with a free 3 pin fan control connection cable


Package content

  • 5.25″ Card Reader
  • 2 x cable
  • Screws
  • User manual


Package

  • Retail Box

General
Form factor
• 5.25"
Function
• Hot Swap
• Plug & Play
Supported operating system
• Linux Kernel 3.7 or above
• Windows 10 32-Bit
• Windows 10 64-Bit
• Windows 7 32-Bit
• Windows 7 64-Bit
• Windows 8 32-bit
• Windows 8 64-bit
• Windows 8.1 32-Bit
• Windows 8.1 64-Bit
LED indicator
• V / A indicator for hub
Interface
External
• 1 x CF slot
• 1 x MS slot
• 1 x Micro SD Slot
• 1 x SD slot
• 1 x xD slot
• 4 x USB 5 Gbps Type-A female
Internal
• 2 x USB 5 Gbps Type-A male
• 1 x 4 pin power connector
• 1 x 3 pin fan pin header male
Technical characteristics
Chipset
• Genesys Logic
Data transfer rate
• USB 10 Gbps up to 10 Gb/s
Physical characteristics
Colour
• black
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.