Delock DIP sliding switch 4-digit 2.54 mm pitch THT vertical black 2 pieces

Item No. 66107
66107 Delock DIP sliding switch 4-digit 2.54 mm pitch THT vertical black 2 pieces
66107
66107
66107
66107 Delock DIP sliding switch 4-digit 2.54 mm pitch THT vertical black 2 pieces small 1
66107 small 2
66107 small 3
66107 small 4
This product is not available anymore.

Description

This DIP sliding switch by Delock is suitable for the solder mounting on a PCB.

THT Assembly Technology
The attached soldering pins on the DIP switch can be inserted through contact holes on a PCB and soldered from the bottom side. The switching rows are used to set configurations and to change parameters.

Multifunctional application
The DIP switch is mainly used in telecommunications, computers and measuring.




Specification

  • Connectors:
    2 x 4 soldering pin
  • Number of positions: 4
  • Pitch: 2.54 mm
  • Switch position: on / off
  • Switching rating: 25 mA, 24 VDC
  • Insulation resistance: 100 MΩ / 500 VDC
  • Withstanding voltage: 500 VAC / 1 minute
  • Soldering temperature: 260 °C for ca. 5 seconds
  • Environmental temperature: -40 °C ~ 85 °C
  • Operating temperature: -20 °C ~ 85 °C
  • Material: plastic
  • Colour: black
  • Dimensions (LxWxH): ca. 11.2 x 6.2 x 3.2 mm


Package content

  • 2 x DIP sliding switch


Package

  • Tube

General
Mounting type
• Soldering
Interface
connector
• 2 x 4 soldering pin
Technical characteristics
Storage temperature
• -40 °C ~ 85 °C
Operating temperature
• -20 °C ~ 85 °C
Resistor
• 100 MΩ / 500 VDC
Physical characteristics
Pitch distance
• 2.54 mm
Material
• Plastic
Length
• 11.2 mm
Width
• 6.2 mm
Height
• 3.2 mm
Switch
• On / Off
Colour
• black
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.