Delock Converter 3G-SDI > DVI

Description

This Delock converter can be used to convert an HD- or 3G-SDI signal to a DVII signal. You can connect e. g. a camera with HD-SDI output to a DVI monitor. The audio signal can be played via a digital Toslink or RCA output. The SDI signal is transmitted via a conventional 75 Ohm coaxial cable with BNC connectors.

Specification

• Connector:
  Input: 1 x BNC female (SDI)
  Output: 1 x BNC female (SDI, pass-through)
  1 x DVI-D 24+5 female
  1 x Toslink S/PDIF
  1 x RCA S/PDIF
  1 x DC Power 5 V
• Supported resolution:
  SD 480i, 525i und 625i
  HD 720p 24, 25, 30, 50 und 60 Hz
  HD 1080i 50, 60 Hz
  HD 1080p 24, 25, 30, 50 und 60 Hz
• Supported data rate: 270 Mb/s ~ 2.97 Gb/s
• Supports 8 channels of 48 kHz audio (PCM)
• Robust metal housing
• Power consumption: max. 2 W
• Dimensions (LxWxH): ca. 120 x 100 x 25 mm

Power supply specification

• Wall power supply
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.5 A
• Output: 5 V / 2 A
• Ground outside, plus inside
• Dimensions:
  inside: ø ca. 2.1 mm
  outside: ø ca. 5.5 mm
  length: ca. 9 mm

Package content

• 3G-SDI > DVI Converter
• Mounting brackets and screws
• Power supply 5 V

Package

• Box