Delock DisplayPort 1.2 Splitter 1 x DisplayPort in > 2 x DisplayPort out 4K
Description
This splitter by Delock receives a DisplayPort signal from a PC or laptop and splits it to two connected displays. Thereby one DisplayPort connection can be used to operate two DisplayPort monitors. Both outputs are dual-mode capable (DP++), so that HDMI or DVI monitors can be connected with suitable adapters.
Note
The product is a Multi-Stream Transport (MST) hub and supports the extended desktop configuration of DisplayPort 1.2. When Mac OS is used, the same image is displayed on both ports (mirrored), it is not possible to use both ports independently of each other.
Specification
- Connectors:
Input:
1 x DisplayPort 20 pin female
1 x DC 5 V power connector
Output:
2 x DisplayPort 20 pin female - Chipset: STDP4320
- DisplayPort 1.2a specification
- Active converter, Single- / Multi-Stream Transport Hub (SST / MST)
- Functions: Mirrored or Extended (Windows only)
- Maximum resolution (depending on the system and the connected hardware):
DisplayPort 1.1 or 1.2 Single Stream Transport (SST):
up to 1920 x 1080 @ 60 Hz (mirror)
DisplayPort 1.2 Multi-Stream Transport (MST):
up to 2560 x 1440 @ 60 Hz or 3840 x 2160 @ 30 Hz (mirror or extended) - DisplayPort output supports Dual Mode DP++
- Supports audio and video signals
- Supports Eyefinity / Single Large Surface (SLS)
- Audio input formats: 7.1 channel up to 192 kHz sample rate
- Metal housing
- Colour: black
- Dimensions (LxWxH): ca. 71 x 61 x 21 mm
- Length: power cable USB Type-A > DC ca. 50 cm
Power supply specification
- Wall power supply
- Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.3 A
- Output: 5 V / 1 A
- Ground outside, plus inside
- Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 9 mm
System requirements
- A free DisplayPort female
- DisplayPort cable
Package content
- DisplayPort Splitter
- USB power cable
- External power supply
- User manual
Package
- Retail Box
General
Specification
• DisplayPort 1.2a
Interface
Output
• 2 x DisplayPort female
Input
• 1 x DisplayPort male
Technical characteristics
Chipset
• STDP4320
Maximum screen resolution
• 3840 x 2160 @ 30 Hz
Physical characteristics
Housing material
• metal
Cable length incl. connector
• 30 cm
Length
• 100 mm
Width
• 67 mm
Height
• 23 mm
Colour
• black
08.08.2022
Datenblatt
08.08.2022
Data sheet
08.08.2022
Dane produktu
08.08.2022
Popis produktu
08.08.2022
Feuille de données
08.08.2022
Hoja de datos
08.08.2022
Datablad
08.08.2022
Adatlap
08.08.2022
Kataloški list
08.08.2022
Φύλλο δεδομένων
08.08.2022
Scheda tecnica
08.08.2022
Fișă cu date
08.08.2022
CE - Declaration of conformity
248.44 kB
Extended Desktop
The splitter is a Multi-Stream-Transport (MST) hub and supports extended desktop configuration. MST mode is only available on DisplayPort 1.2 graphics cards. The splitter will show the same image (mirror) on both outputs if a graphics card with Displayport 1.1 is used.
Maximum Resolution
A single Displayport 1.2 connection has a limit amount of bandwidth. This limits the number of displays that can be connected through an MST hub depending on the displays resolution, timing and refresh rate. Please see below for bandwidth usage of different resolutions:
1920 x 1080 @ 60 Hz uses 22%, 1920 x 1200 @ 60 Hz uses 30% bandwidth
2560 x 1440 @ 60 Hz uses 35%, 2560 x 1600 @ 60 Hz uses 38% bandwidth
3840 x 2160 @ 30 Hz uses 43%, 3840 x 2160 @ 60 Hz uses 95% bandwidth
1920 x 1080 @ 60 Hz uses 22%, 1920 x 1200 @ 60 Hz uses 30% bandwidth
2560 x 1440 @ 60 Hz uses 35%, 2560 x 1600 @ 60 Hz uses 38% bandwidth
3840 x 2160 @ 30 Hz uses 43%, 3840 x 2160 @ 60 Hz uses 95% bandwidth
similar items
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
Delock DisplayPort 1.2 Splitter 1 x mini DisplayPort in > 2 x DisplayPort out 4K
Item No. 87695
Delock DisplayPort 1.2 Splitter 1 x DisplayPort in > 2 x DisplayPort out 4K
Item No. 87665