ProductsMultimediaSplitter87694 Delock DisplayPort 1.2 Splitter 1 x DisplayPort in > 4 x DisplayPort out 4K

Delock DisplayPort 1.2 Splitter 1 x DisplayPort in > 4 x DisplayPort out 4K

Item No. 87694
picture
picture
picture
prev 1
prev 2
prev 3
buy now

Description

This splitter by Delock receives a DisplayPort signal from a PC or laptop and splits it to four connected displays. Thereby one DisplayPort connection can be used to operate four DisplayPort monitors. The outputs are dual-mode capable (DP++), so that HDMI or DVI monitors can be connected with suitable adapters.


Note

The product is a Multi-Stream Transport (MST) hub and supports the extended desktop configuration of DisplayPort 1.2. When Mac OS is used, the same image is displayed on both ports (mirrored), it is not possible to use both ports independently of each other.


Specification

• Connectors:
  Input:
  1 x DisplayPort 20 pin male
  1 x 5 V DC jack
  Output:
  4 x DisplayPort 20 pin female
• Chipset: STDP4320
• DisplayPort 1.2a specification
• Active converter, Single- / Multi-Stream Transport Hub (SST / MST)
• Functions: Mirrored or Extended (Windows only)
• Maximum resolution (depending on the system and the connected hardware):
  DisplayPort 1.1 or 1.2 Single Stream Transport (SST):
  up to 1920 x 1080 @ 60 Hz (mirror)
  DisplayPort 1.2 Multi-Stream Transport (MST):
  up to 2560 x 1440 @ 60 Hz or 3840 x 2160 @ 30 Hz (mirror or extended)
  max. 4x 1920 x 1080 @ 60 Hz
• DisplayPort output supports Dual Mode DP++
• Supports Eyefinity / Single Large Surface (SLS)
• Supports audio and video signals
• Supports HDCP 1.3
• Audio input formats: 7.1 channel up to 192 kHz sample rate
• Metal housing
• Cable length without connectors: ca. 30 cm
• Colour: black
• Dimensions (LxWxH): ca. 143 x 67 x 23 mm


Power supply specification

• Wall power supply
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.4 A
• Output: 5 V / 2 A
• Ground outside, plus inside
• Dimensions:
  inside: ø ca. 2.1 mm
  outside: ø ca. 5.5 mm
  length: ca. 9 mm


System requirements

• A free DisplayPort female


Package content

• DisplayPort Splitter
• External power supply
• User manual


Package

• Retail Box


Here you can find information about DisplayPort

General
Specification
• DisplayPort 1.2a
Interface
Output
• 4 x DisplayPort 20 pin female
Input
• 1 x DisplayPort 20 pin male
• 1 x 5 V DC female 5,5 mm x 2,1 mm
Technical characteristics
Chipset
• STDP4320
Maximum screen resolution
• 3840 x 2160 @ 30 Hz
Physical characteristics
Housing material
• metal
Cable length incl. connector
• 30 cm
Length
• 143 mm
Width
• 67 mm
Height
• 23 mm
Colour
• black
Power supply
Type
• Euro wall power supply
Connector
• DC male 5.5 mm x 2.1 mm
Extended Desktop The splitter is a Multi-Stream-Transport (MST) hub and supports extended desktop configuration. MST mode is only available on DisplayPort 1.2 graphics cards. The splitter will show the same image (mirror) on both outputs if a graphics card with Displayport 1.1 is used.
Maximum Resolution A single Displayport 1.2 connection has a limit amount of bandwidth. This limits the number of displays that can be connected through an MST hub depending on the displays resolution, timing and refresh rate. Please see below for bandwidth usage of different resolutions:
1920 x 1080 @ 60 Hz uses 22%, 1920 x 1200 @ 60 Hz uses 30% bandwidth
2560 x 1440 @ 60 Hz uses 35%, 2560 x 1600 @ 60 Hz uses 38% bandwidth
3840 x 2160 @ 30 Hz uses 43%, 3840 x 2160 @ 60 Hz uses 95% bandwidth
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.