Delock Adapter cable USB Type-A to Serial RS-232 RJ12 with ESD protection Leadshine 2 m

Item No. 66737

Overview

Description

This USB to serial RS-232 RJ12 adapter cable by Delock is suitable with the ProTuner software for configuration, control, monitoring etc. of the servo and stepper motors by Leadshine.

Compatible Devices:
Stepper motors:
DM432C, DM442, DM556, DM856 3DM683 AM882 DM1182 DM2282
Servomotors:
DCS810, DCS810S, ACS306, ACS606, ACS806
 
Technical details
  • Connectors:
      1 x USB 2.0 Type-A male
      1 x Serial RS-232 RJ12 plug
  • Chipset: FTDI FT231X
  • Plug & Play
  • ESD protection:
  • FIFO: 512 Byte - TX
  • FIFO: 512 Byte - RX
  • Compatible with USB 3.0, USB 2.0, and USB 1.1 full speed 12 Mbps
  • Data transfer rate up to 230.4 Kb/s
  • Signals: RXD(3), GND(4), TXD(5)
  • ESD protection IEC 61000-4-2
      HCP & VCP: ±4 kV
      Air Discharge: ±8 kV
      Contact Discharge: ±4 kV
  • Colour: black
  • Cable length incl. connectors: ca. 2.0 m
  • Suitable for various devices by Leadshine
System requirements
  • Windows 8.1/8.1-64/10/10-64/11
  • PC or laptop with a free USB Type-A port
Package content
  • Adapter cable USB 2.0 Type-A to RS-232 RJ12
Package
  • Zip poly bag

Technical details

General

Specification
  • RS-232 (EIA / TIA)
  • USB 2.0
Supported operating system
  • Windows 10 32-Bit
  • Windows 10 64-Bit
  • Windows 8.1 32-Bit
  • Windows 8.1 64-Bit

Interface

Connector 1
  • 1 x USB 2.0 Type-A male
Connector 2
  • 1 x RJ12 plug

Technical characteristics

Chipset
  • FTDI FT231XS
Data transfer rate
  • bis zu 230,4 Kbps
FIFO
  • 2 x 512 Byte
Signal transmission
  • TxD, RxD und GND
UART
  • USB to serial UART

Physical characteristics

Cable length incl. connectors
  • 2 m
Colour
  • black
Surge Protection
  • ±8 kV EN / IEC 61000-4-2 Air Gap Discharge
  • ±4 kV EN / IEC 61000-4-2 Contact Discharge
  • ±4 kV EN / IEC 61000-4-2 VCP & HCP
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.