Delock 2.5″ Converter SATA 22 pin > 2 x M.2 with RAID with Enclosure
Description
This Delock converter enables the connection of up to two M.2 SSD in 2280, 2260, 2242 or 2230 format which can be used as a 2.5″ HDD. The converter can be installed into the system internally through a SATA 22 pin interface. When using more than one SSD, there is the possibility to use different RAID level.
Note
This product provides a chipset-based RAID function. Management and setting of the RAID mode is not possible via the operating system or BIOS. Different diagnostic software is not compatible with this solution.
The SMART function is not supported. JBOD is only supported on SATA controllers with port multiplier function.
Technical details
- Connectors:
1 x SATA 6 Gb/s 22 pin plug
2 x 67 pin M.2 key B slot - Interface: SATA
- Chipset: Asmedia ASM1092R
- Form factor: 2.5″
- Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key B
or key B+M based on SATA - Maximum height of the components on the module: 1.35 mm,
application of double-sided assembled modules supported - Supports RAID 0, 1, JBOD
- DIP switch for RAID mode setting
- 2 x LED for SATA host activity (green) and M.2 SSD error (red)
- Bootable
- Data transfer rate up to 6 Gb/s
- OS independent, no driver installation necessary
System requirements
- A free SATA 22 pin interface
Package content
- Converter
- 2.5″ enclosure
- Mounting material
Package
- Box
29.02.2024
Datenblatt
29.02.2024
Data sheet
29.02.2024
Dane produktu
29.02.2024
Popis produktu
29.02.2024
Feuille de données
29.02.2024
Hoja de datos
29.02.2024
Datablad
29.02.2024
Adatlap
29.02.2024
Kataloški list
29.02.2024
Φύλλο δεδομένων
29.02.2024
Scheda tecnica
29.02.2024
Fișă cu date
07.03.2023
User Manual Multilingual
613.43 kB