Delock External Enclosure 2 x mSATA > USB 3.1 Gen 2 with RAID
Description
The aluminium enclosure by Delock enables the installation of two mSATA SSD, which can be connected via USB Type-C™ to the PC or laptop. When using more than one SSD, there is the possibility to use different RAID level.
Note
The package contains the cable USB-C™ male to USB Type-A male. This can also be used only in this direction. Therefore the USB-C™ male must be connected to the computer and the USB Type-A male to the enclosure.
Optionally there is a cable from Delock USB Type-A male to USB Type-A male (83981), so that this enclosure can also be connected to a computer with USB Type-A interface. In addition, there is the possibility to connect a power supply if the power from the USB port is not enough.
Specification
- Connector:
external:
1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type-A female
1 x 5 V DC jack
internal:
2 x mSATA slot (full size) - Chipset: Asmedia ASM1352R
- For 3.3 V mSATA module
- Supports RAID 0, 1, SPAN, Port Multiplier
- RAID mode set by DIP switch on board
- Data transfer rate up to 6 Gbps
- Enclosure with full-PCB
- Colour: silver
- Dimensions (LxWxH): ca. 110 x 80 x 16 mm
- Hot Plug, Plug & Play
Specification of power connector
• 5 V, ground outside, plus inside
• Dimensions:
inside: ø ca. 1.35 mm
outside: ø ca. 3.5 mm
length: ca. 8.5 mm
• Optional power supply: Navilock 41337
System requirements
- Windows 7/7-64/8.1/8.1-64/10/10-64, Linux ex Kernel 4.6, Mac OS 10.12
- PC or laptop with a free USB Type-C™ or Thunderbolt™ 3 port
Package content
- External enclosure
- Cable USB-C™ male to USB Type-A male, length ca. 50 cm
- Cover, screwdriver, screws
- User manual
Package
- Retail Box
Here you can find information about USB Type-C™ + USB 5/10/20 Gbps
• Plug & Play
• Mac OS 10.9 or above
• Windows 10 32-Bit
• Windows 10 64-Bit
• Windows 7 32-Bit
• Windows 7 64-Bit
• Windows 8.1 32-Bit
• Windows 8.1 64-Bit
• 1 x USB 10 Gbps Type-A female
• 0
• 1
• Port Multiplier