Delock Converter Ethernet LAN TCP/IP > Serial RS-232

Item No. 62504
62504
62504
62504
62504
62504
62504 1
62504 2
62504 3
62504 4
62504 5
buy now

Description

The Delock TCP/IP Ethernet to RS-232 converter by Delock enables you to integrate and control serial devices based on RS-232 via your network. The converter is suitable for DIN rail mounting.


Specification

• Connector:
  Host:     1 x RJ45 female
  Device: 1 x D-Sub 9 pin Serial RS-232 male
                1 x DC 1.3 x 3.5 mm for power supply
                1 x 2 pin terminal block for power supply
• Data transfer rate:
  Fast Ethernet up to 100 Mb/s
  RS-232 up to 460 Kb/s
• LED indicators for status TX / RX
• Reset bottom
• ± 15 kV ESD protection for all signal pins
• Power consumption: 97 mA / 2328 mW
• Power supply with 10 ~ 30 V via terminal block or DC port
• Dimension DC port: 1,35 x 3,5 mm (ground outside, plus inside)
• Operating temperature: - 25° ~ 65° C
• Storage temperature: - 40° ~ 85° C
• Relative humidity: 5 ~ 95 % (not condensing)
• Housing: plastic
• Dimension (LxWxH): ca. 94 x 54 x 22 mm


System requirements

• Windows XP/XP-64/Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64/Server 2012
• One free Ethernet port


Package content

• Converter
• Mounting set for DIN rail
• Driver CD
• User manual


Package

• Box


Here you can find information about RS-232

General
Specification
• RS-232 (EIA / TIA)
• Ethernet
• TCP/IP
Supported operating system
• Windows 10 32-bit
• Windows 10 64-bit
• Windows 7 32-bit
• Windows 7 64-bit
• Windows 8 32-bit
• Windows 8 64-bit
• Windows 8.1 32-bit
• Windows 8.1 64-bit
• Windows Server 2012 R2
• Windows Server 2016
LED indicator
• PWR / RXD / TXD
Protection
• ESD (Electrostatic Discharge)
Interface
Connector 1
• 1 x serial RS-232 DB9 male
Connector 2
• 1 x RJ45 jack
connector 3
• 1 x DC jack
connector 4
• 1 x 2 pin terminal block
Technical characteristics
Data transfer rate
• up to 460,8 Kbps
• Ethernet up to 10 Mbps
• Fast Ethernet up to 100 Mbps
Operating temperature
• -35 °C ~ 85 °C
Humidity
• 0 ~ 90 %
Data transmission
• asynchronous
• full duplex
Voltage
• 10 V - 30 V
Current consumption
• 90 mA
Physical characteristics
Housing colour
• black
Housing material
• Plastic
Weight
• 67 g
Length
• 94 mm
Width
• 54 mm
Height
• 34 mm
Power supply
Connector
• DC male 3.5 mm x 1.35 mm
Welche Ursache hat die Fehlermeldung error-code-0xe0000235 ?
 
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.