Delock Extender RS-232 DB9 female RJ45 female to RS-232 DB9 male RJ45 female ESD protection 1200 m range extended temperature range
Description
This RS-232 Extender with two converters and RJ45 connectors by Delock can bridge long distances between RS-232 devices bidirectionally and OS independently. The differential transmission technology prevents data errors that can occur caused by external interference or different ground potentials. Additional power supplies on the converters ensure the quality of the data signals. Cable lengths of up to 1200 m are achieved. The RS-232 Extender connects scanners, measurement instruments, machines, computers, IOT devices etc.
Specification
- Connectors:
1 x serial RS-232 DB9 female with screws >
1 x RJ45 jack
1 x serial RS-232 DB9 male with nuts >
1 x RJ45 jack - Plug & Play
- Screw type: #4-40 UNC
- ±15 kV ESD protection for all serial signals
- Data transfer rate up to 460.8 Kbps (300 m, Cat.5)
- Data transfer rate up to 115.2 Kbps (1200 m, Cat.5)
- Signals: RXD, TXD, CTS, RTS
- Flow control: none, Xon / Xoff, RTS / CTS
- Data transmission: bidirectional and differential
- LED indicator for power and activity
- Housing material: plastic
- Housing colour: black
- Cable length incl. connectors: ca. 24 cm
- Operating temperature: -20 °C ~ 80 °C
- Relative humidity: 20 - 60 %
- Dimensions (LxWxH): ca. 46 x 35 x 24 mm
Power supply specification
- Wall power supply
- Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.5 A
- Output: 5 V / 2 A
- Cable length incl. connectors: ca. 1.4 m
- Ground outside, plus inside
- Dimensions:
inside: ø ca. 1.35 mm
outside: ø ca. 3.5 mm
length: ca. 9.5 mm
System requirements
- Devices with a free RS-232 interface
Package content
- Converter RS-232 DB9 female with screws > RJ45 female
- Converter RS-232 DB9 male with nuts > RJ45 female
- 2 x power supply
Package
- Box
General
Specification
• RS-232 (EIA / TIA)
• RS-422
• RS-422
Supported operating system
• OS independent, no driver installation necessary
LED indicator
• Activity
• Power
• Power
Protection
• ESD (Electrostatic Discharge)
• Common mode Voltage +12V to -7V
• Common mode Voltage +12V to -7V
Interface
Connector 1
• 1 x RJ45 RS-422
Connector 2
• 1 x RS-232
Technical characteristics
Data transfer rate
• up to 460,8 Kbps
Converter type
• active
Operating temperature
• -20 °C ~ 80 °C
Humidity
• 20 ~ 90 %
Signal transmission
• TxD, RxD, RTS, CTS
Data transmission
• Bi-directional
• full duplex
• differential
• full duplex
• differential
Voltage
• 5 V
Physical characteristics
Connector color
• black
Housing colour
• black
Housing material
• Plastic
Weight
• 70 g
Cable colour
• black
Cable length incl. connector
• 24 cm
Pin finishing
• gold-plated
Screw type
• #4-40 UNC
Length
• 47 mm
Width
• 43.0 mm
Height
• 24.0 mm
Overvoltage protection
• 15 kV
• 15 kV RS-422 / RS-485
• 15 kV RS-422 / RS-485
Power supply
Type
• Euro wall power supply
Input
• AC 100 - 240 V / 50 - 60 Hz / 0.5 A
Output
• 5 V / 2 A
Connector
• DC male 3.5 mm x 1.35 mm
Cable length
• 1.4 m

05.12.2022
Datenblatt

05.12.2022
Data sheet

05.12.2022
Dane produktu

05.12.2022
Popis produktu

05.12.2022
Feuille de données

05.12.2022
Hoja de datos

05.12.2022
Datablad

05.12.2022
Adatlap

05.12.2022
Kataloški list

05.12.2022
Φύλλο δεδομένων

05.12.2022
Scheda tecnica

05.12.2022
Fișă cu date

21.11.2022
CE - Declaration of conformity
248.29 kB
Other interface variant
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.

Delock Converter Ethernet LAN TCP/IP > Serial RS-232
Item No. 62504

Delock Converter Ethernet LAN RJ45 10/100 Mbps jack to serial RS-232 DB9 male with nuts
Item No. 62976
Accessory

Delock RS-232 Tester DB9 female > DB9 male
Item No. 87713

Delock Adapter RS-232 DB9 female Loopback
Item No. 65843