Delock USB Type-C™ Converter for 1 x M.2 NVMe SSD + 1 x SATA SSD / HDD with Clone Function

Item No. 64252
64252 Delock USB Type-C™ Converter for 1 x M.2 NVMe SSD + 1 x SATA SSD / HDD with Clone Function
64252
64252
64252
64252
64252 Delock USB Type-C™ Converter for 1 x M.2 NVMe SSD + 1 x SATA SSD / HDD with Clone Function small 1
64252 small 2
64252 small 3
64252 small 4
64252 small 5
buy now

Description

This converter by Delock enables the simultaneous operation of an M.2 NVMe SSD, in 2280, 2260, 2242 and 2230 format, and a 2.5″ or 3.5″ SATA HDD or SSD through the USB interface.


Clone Function without PC

The built-in clone function allows to clone memory without using a PC. It is possible to clone from NVMe to SATA and SATA to NVMe.


Technical details

  • Connectors:
    1 x USB 10 Gbps USB Type-C™ female
    1 x M.2 key M slot
    1 x SATA 6 Gb/s 22 pin receptacle
    1 x DC jack
  • Chipset: JMicron JMS581D
  • Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key M or key B+M based on PCIe (NVMe)
  • Maximum height of the components on the module: 1.5 mm, application of double-sided assembled modules supported
  • For 2.5″ and 3.5″ SATA HDD / SSD
  • Supports NVM Express (NVMe)
  • Supports S.M.A.R.T.
  • Supports TRIM
  • Supports Native Command Queuing (NCQ)
  • Data transfer rate up to 10 Gbps
  • Supports UASP
  • 7 x LED indicator for power, access and copy status
  • Bootable
  • Function key:
    1 x Clone button
    1 x On / Off switch
    1 x switch for clone mode
  • Dimensions (LxWxH): ca. 107 x 35 x 24 mm
  • Hot Plug, Plug & Play


Power supply specification

  • Wall power supply
  • Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.5 A
  • Output: 12 V / 3 A
  • Ground outside, plus inside
  • Dimensions:
    inside: ø ca. 2.5 mm
    outside: ø ca. 5.5 mm
    length: ca. 10 mm


System requirements

  • Android 11.0 or above
  • Chrome OS
  • Linux Kernel 5.15 or above
  • Mac OS 12.4 or above
  • Windows 10/10-64/11
  • iPad Air (4th Generation) or above
  • iPad Pro (3rd Generation) or above
  • Surface Pro 7
  • PC or laptop with a free USB Type-A port or
  • Device with a free USB Type-C™ port or with a free Thunderbolt™ 3 or Thunderbolt™ 4 port


Package content

  • USB Type-C™ converter
  • Cable USB-C™ male to USB-C™ male, length ca. 80 cm
  • Cable USB-C™ male to USB Type-A male, length ca. 80 cm
  • 3 x rubber nipple
  • External power supply 12.0 V / 3.0 A
  • User manual


Package

  • Retail Box


M.2 Here you can find information about M.2

USB Type-C™ + USB standards Here you can find information about USB Type-C™ + USB standards

General
Function
• bootable
• Clone Function
Suitable for data medium
• 2.5″
• 3.5″
Supported operating system
• Chrome OS
• Surface Pro 7
• Windows 10 32-Bit
• Windows 10 64-Bit
• iPad Pro (3rd Generation) or above
• iPad Air (4th Generation) or above
• Windows 11
• Mac OS 12.4 oder höher
• Android 11.0 or above
• Linux Kernel 5.15 or above
LED indicator
• 7 x
Slot
• PCIe
Supported module
• M.2 modules in format 2280, 2260 and 2242 with key M or key B+M based on PCIe
Interface
Connector 1
• 1 x USB 10 Gbps USB Type-C™ female
Connector 2
• 1 x SATA 6 Gb/s 22 pin receptacle
connector 3
• 1 x 67 pin M.2 key M slot
connector 4
• 1 x 12 V DC jack
Technical characteristics
Chipset
• JMicron JMS581D
Data transfer rate
• 10 Gbps
Physical characteristics
Colour
• black
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.