ProductsAdapter / ConverterWhole category87585

Delock USB 2.0 Adapter to 1 x Serial RS-422/485

Item No. 87585
87585
87585
87585
87585
87585
87585 1
87585 2
87585 3
87585 4
87585 5
buy now
Overview Technical details Documents Driver FAQ

Description

This adapter by Delock enables the connection of a serial device via a USB Type-A port.


Specification

  • Connectors:
    1 x USB 2.0 Type-B female >
    1 x serial RS-422/485 DB9 male
  • Chipset: FT232HL, SP3078EE
  • 1 x DIP switch: RS-422/485 operation setting
  • Internal pin header: jumper switch terminator on / off
  • Serial connector with nuts
  • Data transfer rate up to 1 Mbps
  • LED for indication of TxD / RxD activity
  • Automatical recognition and switching between RS-422 and RS-485
  • ±15 kV ESD protection on all signal pins
  • Wall mounting integrated in the housing
  • Current consumption:
    operation: ≤ 61 mA / 305 mW
    standby: ca. 16 mA / 80 mW
  • Additional I/O and IRQ are not required
  • Operating temperature: 0 °C ~ 70 °C
  • Dimensions (LxWxH): ca. 80 x 72 x 23 mm


System requirements

  • Linux Kernel 2.6 or above
  • Windows Server 2012/Server 2012 R2/Server 2016
  • Windows Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64/11
  • PC or laptop with a free USB Type-A port


Package content

  • USB 2.0 to 1 x serial RS-422/485 adapter
  • USB 2.0 cable
  • 2 x jumper
  • Driver CD
  • User manual


Package

  • Retail Box


Here you can find information about RS-422 / RS-485

General
Function
• Converter
• Programmable EEPROM
Mounting type
• Wall mounting
Specification
• RS-422 / RS-485 (EIA / TIA)
• UHCI/OHCI/EHCI
Supported operating system
• Linux Kernel 2.6 or above
• Windows 10 32-bit
• Windows 10 64-bit
• Windows 7 32-bit
• Windows 7 64-bit
• Windows 8.1 32-bit
• Windows 8.1 64-bit
• Windows Server 2012 R2
• Windows Server 2016
• Windows Server 2019
• Windows 11
LED indicator
• RX / TX
Protection
• Failsafe protection for open, shorted or terminated lines
DIP Switches
• 2 x
Interface
Connector 1
• 1 x USB Type-B
Connector 2
• 1 x serial DB9 male with nuts
Technical characteristics
Chipset
• SP3078EE
• FTDI 232HL
Data transfer rate
• RS-422 / RS-485 up to1 Mbps
FIFO
• 1 KByte RX
• 1 KByte TX
Impedance
• 120 ‎Ω
Jumper
• 2 x
Operating temperature
• 0 °C ~ 70 °C
Maximum power consumption
• 305 mW
Signal transmission
• Tx+, Tx-, Rx+, Rx-, GND
Data transmission
• asynchronous
• Bi-directional
• Half duplex
• full duplex
• differential
Voltage
• USB bus powered
UART
• USB to serial UART
Resistor
• Terminalresistor 120 Ω ON/OFF
Support
• 256 Multidrop Nodes
Data bits
• 7, 8
Physical characteristics
Ferrite core
• 1 x
Housing material
• metal
Cable colour
• black
Length
• 80 mm
Width
• 72 mm
Height
• 23 mm
Colour
• grey / white / blue
Overvoltage protection
• ±8 kV EN / IEC 61000-4-2 Contact Discharge
• 15 kV RS-422 / RS-485
Chipset manufacturer More information can be obtained from the chipset manufacturer at the following website:
More informations about this product

Microsoft WHQL certified
 
Other interface variant
Delock Converter 1 x Serial RS-232 DB9 female to 1 x Serial RS-422/485 DB9 male with ESD protection 15 kV
Item No. 62920
Delock Converter 1 x Serial RS-232 DB9 to 1 x Serial RS-485 with ESD protection 15 kV surge protection 600 W
Item No. 64140
 similar items
Delock USB 2.0 Adapter to 2 x Serial RS-422/485
Item No. 87586
Delock USB 2.0 Adapter to 4 x Serial RS-422/485
Item No. 87587
Delock Converter USB 2.0 > Serial RS-422/485 with 3 kV Isolation
Item No. 62501
Delock Adapter USB 2.0 > 1 x Serial RS-422/485
Item No. 62406
Delock USB 2.0 to serial RS-485 adapter with 15 kV ESD protection and a compact serial connector housing
Item No. 66283
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.