Delock USB 2.0 Adapter to 4 x Serial RS-422/485

Item No. 87587
87587
87587
87587
87587
87587
87587 1
87587 2
87587 3
87587 4
87587 5
buy now

Description

This adapter by Delock enables the connection of up to four serial devices via a USB Type-A port.


Specification

• Connectors:
  1 x USB 2.0 Type-B female >
  4 x serial RS-422/485 DB9 male
  1 x 5 V DC jack
• Chipset: FT4232HL, SP3078EE
• 4 x DIP switch: RS-422/485 operation setting
• Internal pin header: jumper switch terminator on / off
• Serial connector with nuts
• Data transfer rate up to 1 Mbps
• LED for indication of TxD / RxD activity
• Automatical recognition and switching between RS-422 and RS-485
• ±15 kV ESD protection on all signal pins
• Wall mounting integrated in the housing
• Current consumption:
  operation: ≤ 143 mA / 715 mW
  standby: ca. 92 mA / 460 mW
• Additional I/O and IRQ are not required
• DC jack for optional power supply
• Operating temperature: 0 °C ~ 70 °C
• Dimensions (LxWxH): ca. 172 x 65 x 23 mm


Specification of power connector

• 5 V, ground outside, plus inside
• Dimensions:
  inside: ø ca. 2.1 mm
  outside: ø ca. 5.5 mm
  length: ca. 9.5 mm


System requirements

• Linux Kernel 2.6 or above
• Windows Server 2012/Server 2012 R2/Server 2016
• Windows Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64/11
• PC or laptop with a free USB Type-A port


Package content

• USB 2.0 to 4 x serial RS-422/485 adapter
• USB 2.0 cable
• 8 x jumper
• Driver CD
• User manual


Package

• White Box


Here you can find information about RS-422 / RS-485

General
Function
• Converter
• Programmable EEPROM
Mounting type
• Wall mounting
Specification
• RS-422 / RS-485 (EIA / TIA)
• UHCI/OHCI/EHCI
Supported operating system
• Linux Kernel 2.6 or above
• Windows 10 32-bit
• Windows 10 64-bit
• Windows 7 32-bit
• Windows 7 64-bit
• Windows 8.1 32-bit
• Windows 8.1 64-bit
• Windows Server 2012 R2
• Windows Server 2016
• Windows Server 2019
• Windows 11
LED indicator
• 4 x RXD
• 4 x TXD
Protection
• Failsafe protection for open, shorted or terminated lines
DIP Switches
• 8 x
Interface
Connector 1
• 1 x USB Type-B
Connector 2
• 4 x Seriell DB9 Stecker mit Muttern
Technical characteristics
Chipset
• FTDI FT2232HL
• SP3078EE
Data transfer rate
• RS-422 / RS-485 up to1 Mbps
FIFO
• 4 x 4 KByte RX
• 4 x 4 KByte TX
Impedance
• 120 ‎Ω
Jumper
• 8 x
Operating temperature
• 0 °C ~ 70 °C
Maximum power consumption
• 305 mW
Signal transmission
• Tx+, Tx-, Rx+, Rx-, GND
Data transmission
• asynchronous
• Bi-directional
• Half duplex
• full duplex
• differential
Voltage
• USB bus powered
UART
• USB to serial UART
Resistor
• Terminalresistor 120 Ω ON/OFF
Support
• 256 Multidrop Nodes
Data bits
• 7, 8
Physical characteristics
Ferrite core
• 1 x
Housing material
• metal
Cable colour
• black
Length
• 172 mm
Width
• 65 mm
Height
• 23 mm
Colour
• grey / white / blue
Overvoltage protection
• ±8 kV EN / IEC 61000-4-2 Contact Discharge
• 15 kV RS-422 / RS-485
Chipset manufacturer More information can be obtained from the chipset manufacturer at the following website:
More informations about this product

Microsoft WHQL certified
 
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.