Delock Converter 1 x Serial RS-232 to 1 x Serial RS-422/485 with ESD protection 15 kV surge protection 600 W and 3 kV isolation extended temperature range
Descripción
This RS-232 to RS-485/422 converter by Delock is suitable for all serial devices, e.g. on machine controls, fieldbus systems, measuring instruments, printers or as RS-232 extender. The connected components are protected against surge power by the integrated protection circuits of the converter. The optical isolation suppresses interference and prevents transmission errors as much as possible. The converter is suitable for DIN rail mounting.
Especificación técnica
- Connectors:
1 x Serial RS-232 DB9 female >
1 x RS-422/485 Terminal Block 7 pin - Modes
2 wire RS-485 (max. 32 devices)
2 wire RS-485 (Echo Mode)
4 wire RS-422 Point to Point
4 wire Multi-Drop RS-485 and RS-422 (max. 10 devices) - ±15 kV ESD protection on all signal pins
- 3 kV optical isolation
- Power Supply: 10 V - 30 V / 0.5 A
- Surge Protection: 600 W peak pulse
- Data transfer rate up to 921.6 Kbps
- Databits: 5, 6, 7, 8
- Stop bits: 1, 1.5, 2
- Parity: even, odd, none, mark, space
- Flow control: none, software XON / XOFF
- 3 x LED indicator
- Operating temperature: - 30 °C ~ 75 °C
- Storage temperature: - 40 °C ~ 85 °C
- Relative humidity: 5 - 95 % (non condensing)
- Housing material: plastic
- Dimensions (LxWxH): ca. 80 x 42 x 22 mm
Requisitos del sistema
- Device with one free RS-422/485 interface
- Device with one free RS-232 interface
Contenido del paquete
- Converter
- Mounting for 35 mm DIN rail
- User manual
General
Función
• optical isolation
• Auto RTS Control
• Auto RTS Control
Mounting type
• DIN rail 35 mm
Especificación técnica
• RS-232 (EIA / TIA)
• RS-422 / RS-485 (EIA / TIA)
• RS-422 / RS-485 (EIA / TIA)
Supported operating system
• SO independiente, no es necesaria la instalación de controladores
Indicador LED
• 3 x PWR / RXD / TXD
Protection
• Input overvoltage protection
• ESD (Electrostatic Discharge)
• pulso pico de 600 W
• ESD (Electrostatic Discharge)
• pulso pico de 600 W
Interface
Conector 1
• 1 x DB9 RS-232 serie hembra
Conector 2
• 1 x RS-422/485 Terminal Block 7 pin
Technical characteristics
Velocidades de transferencias de datos
• up to 921.6 Kbps
Storage temperature
• -40 °C ~ 85 °C
Temperatura de funcionamiento
• -30 °C ~ 75 °C
Humidity
• 5 ~ 95 %
Data transmission
• asynchronous
• full duplex
• full duplex
Physical characteristics
Material de la carcasa
• Plástico
Longitud
• 96.7 mm
Width
• 42 mm
Height
• 22.2 mm
Color
• negro
Overvoltage protection
• 15 kV RS-422 / RS-485
artículos similares
Todos los nombres y símbolos aquí mencionados son propiedad de sus respectivos productores. Exceptuando errores, errores de impresión y cambios.
Delock Convertidor 1 x Serie RS-232 a 1 x Serie RS-422/485 con protección ESD Protección contra sobretensiones de 15 kV 600 W y 2,5 kV rango de temperatura extendido de aislamiento
Número de elemento 87686
Delock Convertidor 1 x Serial RS-232 DB9 hembra a 1 x Serial RS-422/485 DB9 macho con protección ESD 15 kV
Número de elemento 62920
Delock Convertidor 1 x Serie RS-232 DB9 a 1 x Serie RS-485 con protección ESD Protección contra sobretensiones de 15 kV 600 W y rango de temperatura extendido
Número de elemento 62919
Delock Convertidor 1 x Serie RS-232 DB9 a 1 x Serie RS-485 con protección ESD de 15 kV
Número de elemento 64140
Other interface variant
Delock Extensor RS-232 DB9 hembra RJ45 hembra a RS-232 DB9 macho RJ45 protección ESD hembra, rango de temperatura extendida, 1200 m de rango
Número de elemento 63934
Delock Converter Ethernet LAN TCP/IP > Serial RS-232
Número de elemento 62504
Delock Converter Ethernet LAN RJ45 10/100 Mbps jack to serial RS-232 DB9 male with nuts
Número de elemento 62976