Delock HDD Dockingstation SATA > USB 2.0 / eSATA + 6 Port USB HUB
Description
This HDD dockingstation enables an external connection of a 2.5″ or 3.5″ SATA HDD via USB and eSATA and offers stable hold for your hard disk. This solution does not require any external enclosure since you can just plug in the HDD only into the dockingstation. The included USB and eSATA cable can be used for connection to a free USB or eSATA port. Furthermore the dockingstation provides a 6 port USB hub for using additional USB devices like adapter or card reader. Due to the One-Touch Backup function you can easily synchronize your data just at the push of a button, when the dockingstation is connected to USB.
Specification
- Connector:
1 x USB 2.0 type B female
1 x eSATA 3 Gb/s 7 pin female
1 x DC jack
1 x 22 pin SATA 3 Gb/s female
1 x On-/ Off switch
6 x USB type A female (hub) - For 2.5″ and 3.5″ SATA HDD
- Suitable for all SATA HDDs up to SATA 6 Gb/s
- Data transfer rate:
USB 2.0 up to 480 Mb/s
eSATA up to 3 Gb/s - Backup-function: allows you to copy / restore / synchronize data
by just one touch on a button - Plug & Play
Power supply specification
- Power supply with IEC connector
- Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.5 A
- Output: 12 V / 3 A
- Ground outside, plus inside
- Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 9.5 mm
System requirements
- Windows XP/Vista/7/8/8.1, Mac Lion 10.7.4, Linux Kernel 2.6
- PC or notebook with a free USB or eSATA port
Package content
- Docking station
- USB cable
- eSATA cable
- External power supply, power cord
- Backup software
- User manual
Package
- Retail Box
20.08.2014
Datenblatt
20.08.2014
Data sheet
20.08.2014
Dane produktu
20.08.2014
Popis produktu
20.08.2014
Feuille de données
20.08.2014
Hoja de datos