Delock Converter 1 x Serial RS-232 to 1 x Serial RS-422/485 with ESD protection 15 kV surge protection 600 W and 3 kV isolation extended temperature range
Description
This RS-232 to RS-485/422 converter by Delock is suitable for all serial devices, e.g. on machine controls, fieldbus systems, measuring instruments, printers or as RS-232 extender. The connected components are protected against surge power by the integrated protection circuits of the converter. The optical isolation suppresses interference and prevents transmission errors as much as possible. The converter is suitable for DIN rail mounting.
Specification
- Connectors:
1 x Serial RS-232 DB9 female >
1 x RS-422/485 Terminal Block 7 pin - Modes
2 wire RS-485 (max. 32 devices)
2 wire RS-485 (Echo Mode)
4 wire RS-422 Point to Point
4 wire Multi-Drop RS-485 and RS-422 (max. 10 devices) - ±15 kV ESD protection on all signal pins
- 3 kV optical isolation
- Power Supply: 10 V - 30 V / 0.5 A
- Surge Protection: 600 W peak pulse
- Data transfer rate up to 921.6 Kbps
- Databits: 5, 6, 7, 8
- Stop bits: 1, 1.5, 2
- Parity: even, odd, none, mark, space
- Flow control: none, software XON / XOFF
- 3 x LED indicator
- Operating temperature: - 30 °C ~ 75 °C
- Storage temperature: - 40 °C ~ 85 °C
- Relative humidity: 5 - 95 % (non condensing)
- Housing material: plastic
- Dimensions (LxWxH): ca. 80 x 42 x 22 mm
System requirements
- Device with one free RS-422/485 interface
- Device with one free RS-232 interface
Package content
- Converter
- Mounting for 35 mm DIN rail
- User manual
General
Function
• optical isolation
• Auto RTS Control
• Auto RTS Control
Mounting type
• DIN rail 35 mm
Specification
• RS-232 (EIA / TIA)
• RS-422 / RS-485 (EIA / TIA)
• RS-422 / RS-485 (EIA / TIA)
Supported operating system
• OS independent, no driver installation necessary
LED indicator
• 3 x PWR / RXD / TXD
Protection
• Input overvoltage protection
• ESD (Electrostatic Discharge)
• 600 W Peak Pulse Power
• ESD (Electrostatic Discharge)
• 600 W Peak Pulse Power
Interface
Connector 1
• 1 x serial RS-232 DB9 female
Connector 2
• 1 x RS-422/485 Terminal Block 7 pin
Technical characteristics
Data transfer rate
• up to 921.6 Kbps
Storage temperature
• -40 °C ~ 85 °C
Operating temperature
• -30 °C ~ 75 °C
Humidity
• 5 ~ 95 %
Data transmission
• asynchronous
• full duplex
• full duplex
Physical characteristics
Housing material
• Plastic
Length
• 96.7 mm
Width
• 42 mm
Height
• 22.2 mm
Colour
• black
Overvoltage protection
• 15 kV RS-422 / RS-485
similar items
All names and symbols mentioned here are property of the respective producer. Printing errors, changes and errors excepted.
Delock Converter 1 x Serial RS-232 to 1 x Serial RS-422/485 with ESD protection 15 kV surge protection 600 W and 2.5 kV isolation extended temperature range
Item No. 87686
Delock Converter 1 x Serial RS-232 DB9 female to 1 x Serial RS-422/485 DB9 male with ESD protection 15 kV
Item No. 62920
Delock Converter 1 x Serial RS-232 DB9 to 1 x Serial RS-485 with ESD protection 15 kV surge protection 600 W and extended temperature range
Item No. 62919
Delock Converter 1 x Serial RS-232 DB9 to 1 x Serial RS-485 with ESD protection 15 kV surge protection 600 W
Item No. 64140
Other interface variant
Delock Extender RS-232 DB9 female RJ45 female to RS-232 DB9 male RJ45 female ESD protection 1200 m range extended temperature range
Item No. 63934
Delock Converter Ethernet LAN TCP/IP > Serial RS-232
Item No. 62504
Delock Converter Ethernet LAN RJ45 10/100 Mbps jack to serial RS-232 DB9 male with nuts
Item No. 62976